Examples of 'dried polymer' in a sentence
Meaning of "dried polymer"
dried polymer: A polymer material that has had its moisture content removed, often through a drying process, resulting in a solid and stable polymer structure
How to use "dried polymer" in a sentence
Basic
Advanced
dried polymer
The dried polymer was weighed to determine the yield.
The spray remained liquid and produced no spray dried polymer.
The final dried polymer was weighed.
Cool trays to ambient temperature, and weigh the dried polymer for yield.
The dried polymer is extruded with extruders of common use.
If evaporation occurs at room temperature, the dried polymer usually forms a fragile, uncoalesced coating.
The dried polymer is then used for evaluation and characterization.
In an aluminum standard DSC cup was placed 4 to 5 mg of the dried polymer.
An advantage of the dried polymer emulsion is that it is frost resistant.
Dried polymer clay can be painted or labeled for demonstration or artistic purposes.
The swell of the dried polymer was 16.
The dried polymer was stored under vacuum until ready for use or evaluation.
After recovery the dried polymer was weighed and particle size measured.
The dried polymer could not be redissolved into hydrocarbon solvents or THF.
After recovery the dried polymer was weighed and the activity is calculated.
See also
The dried polymer is cut into strips and redissolved in water or water / cosolvent mixture.
In both documents the dried polymer is surtactant tree and tree ot residual inorganics.
The dried polymer was clear, translucent and visually appealing, indicating little presence of inorganic impurities.
The resulting dried polymer was soluble in methylene chloride and chloroform.
The dried polymer was weighed and analyzed for Zr contents.
Each sample of dried polymer was frozen with liquid nitrogen and ground to a fine powder.
The dried polymer can be treated as any other typical catalyst support, for example dehydrated.
G of dried polymer was obtained.
The dried polymer pellets are then extruded 29 forming a coarse monofilament which is quenched 30.
The recovered dried polymer was now an extremely tough ionomerically cross-linked elastomer.
The dried polymer was dissolved in meta-cresol to give an 0.5 % strength solution.
The resulting dried polymer film has a thickness of about 100 microns.
The dried polymer 1C had the following properties,.
The spray dried polymer formed big aggregates with a fiber-like structure.
Weigh dried polymer and test tube ( recorded as Weight C ).
The dried polymer was found to contain 7.8 weight percent sulfur.
The dried polymer was dissolved in meta-cresol to provide an 0.5 % strength solution.
The dried polymer strand or film is reduced to a convenient form ( e.g., by a pelletizer ).
The dried polymer is dissolved in meta-cresol in such amount as to provide a 0.5 % strength solution.
You'll also be interested in:
Examples of using Polymer
Show more
Injected polymer compound shell in three sizes
We seem to be a bit light in the polymer sciences
High resistance polymer flow indicator cover
Examples of using Dried
Show more
Dried material can be removed with acetone
These toys are dried out of the sun
Dried material lodged in openings of air cap
