Examples of 'drill out' in a sentence
Meaning of "drill out"
drill out - To remove something by drilling, often used in the context of dentistry to indicate the process of removing decay or filling material from a tooth with a drill
How to use "drill out" in a sentence
Basic
Advanced
drill out
Drill out the corners before sawing.
Bring my steam drill out on the job.
Drill out only the center of the drain hose connector.
Then we had to drill out the holes.
Take the drill out of the opening from time to time to remove dust.
Or we get the cordless drill out of the boot.
I will drill out a little sample.
We will get this drill out.
He had to drill out two rivets to do this.
Not until you let Drill out.
Get my drill out of the greenhouse.
We had to pry the electric drill out of your hands.
Get my drill out of the greenouse.
Ivy 's gonna have a competitive drill out back.
Do not drill out or use wire.
See also
Again, you may find that you need to drill out the wheels slightly.
But drill out the barrel.
Take the drill out.
Mark and drill out mounting holes in the wall.
After removing the drawers drill out the rivets, use a.
Take the drill out of the hole from time to time to remove dust.
Built to fire a gas cartridge . But drill out the barrel.
Then they drill out the other side.
Success in real-life scenarios . It is currently used by major drilling companies to drill out.
Drill out blocked ports using this drill bit in a small cordless drill.
I am coming . Get my drill out of the greenouse.
Drill out the linkage holes in the output arms to suit the connector pivot shaft.
I am coming . Get my drill out of the greenhouse.
Drill out the original rivets x4 per woofer.
Get that drill out of here!
Drill out old threads with a standard drill . Note, Drill is oversized see charts.
What's your favorite drill out of these three?
We do not drill out your lock because that 's what amateurs do.
We are through . Pulling the drill out.
Bring my steam drill out on the job I am gonna whup that steel on down.
I left my drill . I left my drill out there!
Use a 10mm drill to drill out the holes for a better fit before inserting the rods.
Something must be affecting it. Agreed. I will drill out a little sample.
I will drill out a little sample . Agreed.
Take the 20 mm drill and drill out a hole.
Drill out to 2 mm Ø to accept the swivel pushrod connector.
Why did you drill out the trunnion?
Drill out the holes in the winglets using a 4 mm Ø bit.
I left my drill out there!
Drill out the linkage holes in the servo output arms to 2 mm Ø.
Fair point, I'll get the drill out.
We expect to drill out the problem screw within about 15 minutes.
Drill out a condensation water drainage opening with a diameter of 32 mm C.
Oh, I left my drill . I left my drill out there! I left my drill!
Scientists drill out 2 million-year-old ice and make a major discovery.
You'll also be interested in:
Examples of using Drill
Show more
Drill holes as indicated in the illustration below
They are gonna drill into the ground
Hand drill or electric drill properly grounded
