Examples of 'drill point' in a sentence
Meaning of "drill point"
In the context of tools, particularly drills, a 'drill point' refers to the sharpened or pointed end of the drill bit. It is the part of the drill that makes contact with the material being drilled, creating a hole or indentation
How to use "drill point" in a sentence
Basic
Advanced
drill point
I calculated the drill point coordinates.
This will make a more aggressive drill point.
Drill point concentricity.
A chrome steel drill point.
The drill point of the pin is drilled through the bones to be joined together.
Multiple techniques may be used to determine the drill point angle.
Four facet drill point minimizes drill wander and assure accurately sized holes.
Place drill press on work surface so that drill point or cutter pilot.
The drill point has a drill point angle of greater than or equal to a predetermined angle.
When tightening set screw make sure it mates with drill point in shaft.
Drill point pressure may exceed holding power under one or more of the following conditions.
Many different approaches have been taken in order to achieve optimal drill point geometry.
The drill point will extend beyond or completely through the distal surface of the bone.
Use the fine adjustment feature on the magnetic drill to align the drill point.
Center punching will prevent walking of the drill point and insure proper hole location.
See also
Drill point not pushed all the way to the Drill Stop.
Center punching will prevent walking of the drill point and ensure proper hole location.
A drill point angle DP not shown in FIG.
Use a tape measure and marker to mark the drill point location and tooling plate location.
Special drill point geometry for optimised self-centring.
Figure 2 shows the bone pin with the drill point attached.
Page 14 shows a drill point that is undersplit and a drill point that is correctly split.
In other features, a surgical bur is provided and includes a body and a drill point.
The use of a lubricant on the drill point helps keep the bit cool, increases.
The cutting end configuration of each twist drill was an S-shaped drill point.
With a drill point open in the Navigate view, select Actions > Print in the toolbar.
When the spindle is furthest from the stand, the maximum drill point pressure is reduced.
Why is the drill point off center?
The cutting end configuration of each drill was an identical S-shaped drill point.
An example drill point angle is shown in FIG . 14.
Rather, they are thread-forming screws with or without drill point tips.
The threading continues over this transition region until the drill point 14.
The Model 350X has been designed and engineered to sharpen the most common drill point types.
This pig iron is almost carbon-free. A chrome steel drill point.
Pocket 534 can be hemispherical, as shown, or can have a conical drill point.
Self drilling screw, with two threads, for sandwich panels, drill point n° 5.
People's exhibit number one -- Chrome steel drill point.
You'll also be interested in:
Examples of using Point
Show more
I agree that is the point why we are here
The point is illustrated in the diagram below
Absorbing light to the point of making it palpable
Examples of using Drill
Show more
Drill holes as indicated in the illustration below
They are gonna drill into the ground
Hand drill or electric drill properly grounded
