Examples of 'drilling depth' in a sentence
Meaning of "drilling depth"
Drilling depth refers to the measurement of how deep a hole or well has been drilled into the ground. It is commonly used in industries such as oil and gas exploration, mining, and construction to assess the progress and feasibility of drilling operations
How to use "drilling depth" in a sentence
Basic
Advanced
drilling depth
Setting the drilling depth depth gauge.
Motor is overloaded due to excessive pressure or drilling depth.
Set the drilling depth as described below.
Masking tape marks drilling depth.
Indicates drilling depth selected on depth scale.
Reduce the pressure or drilling depth.
Notches on the drilling depth limiter should be seen.
Slide the end stop to the required drilling depth.
Adjust the drilling depth as shown.
Drilling depth with depth stop and drill sleeve.
Adjust the depth gauge to the desired drilling depth.
Set the desired drilling depth by adjusting the distance.
Heat pumps are used in order to keep the drilling depth low.
Set the drilling depth by turning the adjustment depth.
Adjust the depth rod to match the desired drilling depth.
See also
The drilling depth may be controlled by watching the indicator and.
Pull the depth stop back by the required drilling depth.
The drilling depth can be adjusted using the depth gauge.
The vacuuming attachment is spring loaded up to the preselected drilling depth.
The drilling depth can be set sharply using the depth scale.
The dust extractor springs back to the predetermined drilling depth.
Sonic drilling depth record with less than one percent deviation.
The depth stop is a convenient feature to ensure uniformity in drilling depth.
Read off the red arrow on the drilling depth scale to help you.
Mark the distance between the holes and determine the drilling depth.
The desired drilling depth t can also be set with the dust extraction attachment mounted.
Advantages Disadvantages Average drilling depth m.
Adjust the drilling depth as shown in Figure.
Approaching stage four, target drilling depth.
The required drilling depth X can also be adjusted when the dust extraction attachment is mounted.
Currently, there are generally two methods of limiting drilling depth.
The required drilling depth X can be set with the depth stop.
The vertical position of said backstop 18 is adjustable for adjusting the drilling depth.
Changes were made for a drilling depth problem found in Siemens Machine Cycle posts.
The graph of FIG . 7B shows how the measured torque varies as a function of drilling depth.
Adjust the drilling depth t on the depth stop 4.
If necessary, set the drilling depth.
Thus, the drilling depth determines the width of a hole.
The drill comprises an adjustable stop 324 to adjust the drilling depth.
The drilling depth can be set with the depth stop 3.
If this is not the case, the drilling depth will be inaccurate.
Drilling depth was controlled and used to define ventral, intermediate and dorsal regions.
You can fix the drilling depth through depth gauge 8.
By pressing button 11 and moving the depth stop 9, the requested drilling depth can be adjusted.
The drilling depth and drilling direction can be determined by X-ray or computed tomography.
Set depth stop ( 4 ) to the desired drilling depth and retighten additional handle.
The drilling depth is provided by means of a drilling stop 41.
Set depth stop ( 4 ) to the desired drilling depth and retighten the side handle.
Your drilling depth can be pre-set and / or repeated by using the depth gauge.
Set the depth stop ( 6 ) to the required drilling depth and release the clamp lever.
You'll also be interested in:
Examples of using Drilling
Show more
When drilling in roofs and the like
Quality of water after drilling the infrastructure
Drilling activity and gas well productivity
Examples of using Depth
Show more
A small amount of depth of cut can be obtained by
Depth measurement also includes door handle
Reassemble the depth guide and reattach
