Examples of 'drilling mode' in a sentence
Meaning of "drilling mode"
drilling mode: a setting or state in which drilling or repetitive practice is emphasized
How to use "drilling mode" in a sentence
Basic
Advanced
drilling mode
Hammer drilling mode rotation with hammering.
The maximum torque is available in drilling mode.
Use rotary drilling mode only.
Work at a higher rotational speed in impact drilling mode.
Selecting the drilling mode figure e.
Never use standard chucks in the hammer drilling mode.
Do not use impact drilling mode on these materials.
Never use keyed chucks in the hammer drilling mode.
Select the drilling mode or torque by aligning the.
Selecting hammer mode or drilling mode.
Use the hammer drilling mode when drilling in masonry.
Never use drill chucks in the hammer drilling mode.
Select the rotary drilling mode using the mode.
Do not apply chisels when the tool is in the drilling mode.
It can also be used in impact drilling mode for drilling masonry and similar materials.
See also
Stone and masonry are generally drilled in the impact drilling mode.
The criteria selected for the drilling mode are given hereafter.
Clutch releaseswhile drilling Tool set to screwdriving mode Set the tool to drilling mode.
Use the rotary drilling mode when drilling in other materials and when screwdriving.
Select the rotary drilling mode.
Slow speed drilling mode This mode is suitable for wood drill with high torque.
This hammer drill can be used in a normal drilling mode as well.
High speed drilling mode This mode is suitable for metal drilling with high speed rotation.
Thus rotational drive is transmitted to the spindle and drilling mode is achieved.
Select the drilling mode using the collar 4.
The collar is rotatable further to an Nth position where the drilling mode is engaged.
Select the drilling mode using the mode selector 4.
Clutch releases while drilling Tool set to screwdriving mode Set the tool to drilling mode.
Along with the drilling mode there are several other modes of operation,.
Only use SDS Chisels or Points with SDS drills that can disengage rotary drilling mode.
For drilling in other materials, set the drilling mode selector to the position.
Figure 4 illustrates the offshore drilling system in a managed pressure drilling mode.
For drilling in masonry, set the drilling mode selector to the hammer icon position.
Set mode selector switch 6 to hammer drilling mode.
Selecting the drilling mode For drilling in masonry, set the drilling mode.
For drilling in masonry, set the drilling mode selector.
Select drilling mode with the Torque Selector 3.
For drilling in other materials, set the drilling mode.
Use rotary drilling mode for wood, metal, and plastics.
For drilling in other materials and for screwdriving, set the drilling mode selector to the.
Rotate the drilling mode selector ( 5 ) towards the required position, as indicated by the symbols.
Before attempting to remove chuck, shift the drill into the drilling mode not hammer.
Select drilling mode when drilling with twist drills, hole saws, etc ., in soft materials.
Figures 3A-3C illustrate the offshore drilling system in an overbalanced drilling mode.
Selecting the drilling mode u For drilling in masonry, set the drilling mode selector ( 6 ) to.
For drilling in masonry, set the drilling mode selector ( 4 ) to the position.
Drilling mode ( rotation only ) Hammer drilling mode ( rotation with hammering ) Screwdriving mode rotation with clutch.
For rotary drilling, set the drilling mode selector ( 6 ) to the position.
Note, The hammer-action drilling mode is intended for drilling into brick, concrete and stone only.
For hammer drilling, set the drilling mode selector ( 6 ) to the position.
You'll also be interested in:
Examples of using Drilling
Show more
When drilling in roofs and the like
Quality of water after drilling the infrastructure
Drilling activity and gas well productivity
Examples of using Mode
Show more
Automatic mode should be selected in normal cases
We have even developed a secret mode of communication
Void mode transaction counter and total
