Examples of 'drilling speed' in a sentence
Meaning of "drilling speed"
drilling speed: The rate at which a drill penetrates a material, usually measured in units of distance per unit of time
How to use "drilling speed" in a sentence
Basic
Advanced
drilling speed
Drilling speed will be slow in such material.
Low pressure results in a slow drilling speed.
Adjust the drilling speed according to the material.
Accumulating dust slows down the drilling speed.
The drilling speed is therefore improved.
Excessive pressing force never increases drilling speed.
Very fast drilling speed and low cutting pressure.
Calculation of the basic influence factors on drilling speed.
This drilling speed may be set prior to drilling into a stackup.
Increasing the drilling speed.
Reduce drilling speed shortly before breaking through in order to avoid spalling.
Factors such as water content control the drilling speed.
A drilling speed in seconds per inch was then calculated from the height of the bar.
Short transition from carbide tip to helix delivers higher drilling speed.
Preferably the material definitions define the drilling speed for a material in the material definitions.
See also
Some types of drilling apparatus may allow only for a single drilling speed.
Causing the spindle to move at the selected drilling speed using the selected drilling speed.
Furthermore, the clays dispersed in the mud can decrease the drilling speed.
This operation may select a drilling speed based on the identified material in the selective layer.
The harder the material, the slower the drilling speed should be.
In general, an increase in drilling speed indicates that the rock is becoming softer.
As a result, absorption of energy with an infrared band is improved, and drilling speed increased.
A dull drill steel will slow down the drilling speed and overstrain the drill mechanism.
Special functions: high-low thread provide smooth power for drilling. flute for better drilling speed.
Optimization of inner structure offers faster drilling speed and more stable operation.
Therefore, the drilling speed is decreased and the wear of the insert is more important.
Implementation of the strategy " Technical Limits " increased drilling speed and also efficiency.
Start, stop and control drilling speed of machine and insertion of casing into hole.
Control according to the present invention is begun when the drilling speed exceeds the speed B2.
Thus, the drilling speed is increased.
Put number 2 pipe back into service and accelerate drilling speed 3.5.
QSP allows for exceptionally fast laser drilling speed with unmatched efficiency and precision.
The process may then cause the drill to drill at the selected drilling speed ( operation 1206 ).
Robustness, lifetime and drilling speed equal to TE-YX drill bits.
However, problems can arise if the drilling speed rises to an excessively high value.
Moreover, you can increase your drilling speed and feed many times over.
You'll also be interested in:
Examples of using Drilling
Show more
When drilling in roofs and the like
Quality of water after drilling the infrastructure
Drilling activity and gas well productivity
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
