Examples of 'drive tube' in a sentence
Meaning of "drive tube"
drive tube ~ this phrase appears to be incomplete or misinterpreted. No specific definition could be found
How to use "drive tube" in a sentence
Basic
Advanced
drive tube
Do not stand or kneel on the drive tube.
Connects the drive tube and bike handle.
Secures lower part of the drive tube.
Front end of drive tube with gearbox and hook.
Correct position of the handgrip on the drive tube.
Secures the shaft in the drive tube during transportation.
Powerhead with control handle and drive tube.
The drive tube may be movable relative to the sleeve.
This could permanently damage the drive tube.
The split drive tube enables the machine to be disassembled for easier transportation.
And position them against the drive tube.
Connects the drive tube to the lower part of the drive tube stub shaft.
Secures the throttle cable to the drive tube.
The drive tube has a diameter smaller than the diameter of the guide tube.
It is important to keep the ends of the drive tube clean.
See also
Fit the protective cap on the drive tube to avoid getting dirt into the coupler.
Must be loosened before adjusting length of telescopic drive tube.
The angle drive may be adjusted on the drive tube to the following positions only.
The deflector may be movable relative to the drive tube.
The plug may come out of the drive tube when you pull off the cap.
It must not be possible to rotate the gearbox on the drive tube.
Drive Tube Encloses and protects the drive shaft between the.
Carry the unit properly balanced by the drive tube or loop handle.
Drive Tube Encloses and protects the drive shaft between the engine and gearbox.
Do not turn the two parts of the drive tube any further.
Drive Tube Encloses and protects the cables between the motor and control handle.
The second member preferably includes a drive tube and an end tube.
Adjustable drive tube enables user to optimize machine 's reach.
On machines with a defined transport position cutter barfolded against the drive tube.
The means for obstructing the ports in the drive tube may comprise the sleeve.
In this way a second ratchet part is formed integrally with the drive tube.
Coupling Sleeve Connects the drive tube to the lower part of the drive.
On machines with a defined transport position cutter bar folded against the drive tube.
The drive tube 6 is actuated and moves towards the right in the figure.
One of the two second tubular elements may partly constitute the drive tube.
Currently, the drive tube is screwed into the ring with tightening torque being applied.
Carry the unit hanging from the shoulder strap or properly balanced by the drive tube.
The drive tube is then rotated to screw the first, spiral electrode into the epidermis.
N Line up the handlebar at a right angle to the drive tube.
You can pressurise your main drive tube so I can work in there?
N Reverse the above sequence to remove the drive tube.
The drive tube 30 is connected to a torsion spring 5 which proximally is secured to a spring base 9.
N Pull the protective cap off the drive tube.
Concentrically disposed within the drive tube 89 is the previously mentioned inner support tube 99.
Wing Screw Secures the lower part of the drive tube stub shaft.
The drive tube further comprises a slot 469 for attaching the inner end of the drive spring.
This KombiTool may also be mounted to STIHL brushcutters with a split drive tube T models.
N Place the clamp ( 3 ) against the drive tube and push it into the loop handle.
Throttle Cable Retainer Secures the throttle cable to the drive tube.
Important, Check security of drive tube screw unions - see " Assembling the Unit.
