Examples of 'dry coating' in a sentence
Meaning of "dry coating"
A dry coating refers to a thin layer or film that is applied onto a surface without the use of a liquid or solvent. It is often used in various industries and applications, such as in cooking, painting, or manufacturing processes
How to use "dry coating" in a sentence
Basic
Advanced
dry coating
The uncompacted dry coating is very even.
The tongue has a red body and dry coating.
The dry coating can also be buffed.
These microprotrusions have a dry coating thereon.
Of the dry coating film.
After application the solvent evaporates leaving a dry coating.
Then one with dry coating is a good choice.
The weight of a coated stent can be taken to be the dry coating weight.
The dry coating weight ca.
Tribological dry coating.
The dry coating is said to improve the fluidizability of the powders.
It is also available as a dry coating on a tiny strip of sterile paper.
The dry coating is flexible and may be used as an etch and plating resist.
In the dry coating.
The amount of water preferably should be fully absorbed by the dry coating powder.
See also
The uncured resin cook gives a dry coating having surprising integrity.
The paper coating slip is applied to the paper or cardboard by a dry coating method.
These ranges apply both to dry coating alone or in combinations with fluid batter.
The tablets containing omeprazole sodium salt were subcoated using the dry coating technique.
The dry coating weight of the protective overcoat can be measured by the following procedure.
The microprojections have a substantially dry coating thereon which contains the active agent.
Multiple dry coating layers may be formed by applying successive layers of the coating composition.
The wet film thus obtained is then dried and giving rise to a dry coating film.
The microprotrusions have a dry coating thereon which contains the pharmacologically active agent.
The device has a plurality of skin piercing microprojections which have a dry coating of the drug.
The nature of the dry coating material did not significantly affect the dissolution profiles.
The method further includes converting the wet coating on the substrate surface to a dry coating.
Dry coating with hydrophobic silica may produce a poorly wetting but still soluble particle.
The medical device provided under step a above may have an essentially dry coating before wetting.
The silica particles used for dry coating include hydrophobic silica or hydrophobically treated silica.
Consequently, the resistance of the dry coating increases.
The dry coating was carried out in a Comil.
Instant Dry coating.
The dry coating with Comil was only for one pass.
In this example, different dry coating methods are compared.
The dry coating with Comil was conducted for one pass or two passes.
Bossard ecosyn ® - lubric is a tribological dry coating that is applied to batches of fasteners.
Id / dry coating module kikusui technology kikusui seisakusho ltd.
In a further embodiment, a dry coating of the porous film may be performed.
Dry coating weight can be measured by X-Ray fluorescence or other suitable methods.
According to another exemplary embodiment, a dry coating composition is applied by electrostatic coating.
In particular, they reduce the penetration of hydrophilic liquid stains into the dry coating.
Therefore, dry coating procedures require plenty of energy.
Similarly, microscopy revealed that the fluorescent beads are dispersed homogenously in the albumin dry coating.
Said tablet is of the dry coating type and includes a core surrounded by a shell ;.
However, too much of the fast solvent will produce a dry coating not having enough flow-out.
As a result, a dry coating film was obtained, and an infrared absorption spectrum thereof was measured.
Technical aside, Waxing must be done on a perfectly dry coating.
The dry coating weights are shown in Table 5.
The microsphere pressure sensitive adhesive dry coating weight was 18 g / m.
You'll also be interested in:
Examples of using Coating
Show more
This coating is liable to be damaged with time
Determination of tin coating mass and hardness
Stir coating material before commencement of work
Examples of using Dry
Show more
Dehumidifier does not dry the air as it should
Let it dry completely before starting it up again
Dehumidifi er does not dry the air as it should
