Examples of 'duct may' in a sentence
Meaning of "duct may"
duct may: This phrase is used to express a possibility or potential action related to a duct. It implies that a duct has the potential to perform a specific function or exhibit a certain behavior
How to use "duct may" in a sentence
Basic
Advanced
duct may
A duct may contain one or more cables.
In some cases the duct may be rotated.
The duct may be secured to the bonnet.
Obstruction of the nasolacrimal duct may occur.
The length of said duct may be variable or adjustable.
The duct may be situated essentially above or below the plurality of racks.
The element defining the duct may be made of plastics material.
The duct may have a section of varying dimensions.
More than one connecting duct may be used in the device.
The duct may extend only on one side.
At least part of the air supply duct may be defined by an access corridor.
The duct may thus be manufactured by low cost molding.
This means that the electron duct may be a straight or bent pipe.
The duct may extend at a distance from the shaft.
The air flow rate in the trunk duct may be increased in other ways.
See also
The duct may extend in the wall of the shank.
Muscles round the opening of the duct may help control the outflow.
The duct may be part of the medium circulation path.
The diameters and relative diameters of the main duct and feed duct may be varied.
A portion of the duct may thus be formed by such an endpiece.
The step to make at least one duct may be done,.
An air duct may have come off the furnace.
The cross-sectional shape of the duct may be generally rectangular.
A damaged duct may allow exhaust gas to enter the vehicle.
In the case of steep thermal inversion, an atmospheric duct may also form.
The furnace return duct may also be used to exhaust from.
Also, the lengths and dimensions of the two portions of duct may vary.
The conveying duct may cross over one or both electrodes.
Inside the magnet arrangement 5 itself the quench duct may have a smaller diameter.
This duct may be entirely horizontal or it may include a vertical portion.
At least part of the inlet duct may be formed integrally with the shroud.
The duct may be small in comparison to the size of the rack.
The vertical portion of the tubular duct may have a different width from the horizontal portion.
The duct may extend at a distance from the wall of the shank.
The inner wall of the duct may be cleaned and scaled ;.
This duct may be identical to the bleeding hole described above.
For example, said portion of the duct may be made of glass or plastic.
The feed duct may be supplied completely or almost entirely with fuel.
In another embodiment of the invention, the duct may be equipped with an acoustic silencer.
The duct may be of stamped metal and welded to the inner jacket.
By way of example, a downstream duct may be a duct for draining runoff water.
The duct may be situated essentially below the at least one rack.
In this case, a rib for fixing the duct may not be additionally required.
The supply duct may taper or terminate rearwardly of the front edge.
Since its size is small, the inlet duct may be made of stainless steel.
The intake duct may be disposed on either side of the recess.
The auxiliary orifice 7 connected to the emptying duct may open out into the annular cavity 8.
The bypass duct may be provided with flow control means.
Instead of throttle valve 6 a three-ways valve and the by-pass duct may be used.
The exhaust duct may be connected directly to the common outlet.
You'll also be interested in:
Examples of using Duct
Show more
Change duct size gradually to minimize turbulence
Durable rotomolded duct rings and housing
Duct supports are recommended to support weight of cabinet
Examples of using May
Show more
I may decide to teach you something tomorrow
Of these uses oratory may serve as an illustration
This may be helpful if network problems occur
