Examples of 'dust cap' in a sentence
Meaning of "dust cap"
A protective cover or cap that is used to shield or seal the opening of an object, typically used to cover the end of a pipe, tube, or connector. It helps prevent the accumulation of dust, dirt, or other unwanted substances and helps maintain the functionality and cleanliness of the object
Show more definitions
- Something worn to protect one from dust; a cover placed over something to keep off dust.
How to use "dust cap" in a sentence
Basic
Advanced
dust cap
Replace the tyre valve dust cap.
Nut and dust cap included.
Remove yoke screw and dust cap.
Threaded dust cap made of metal.
Cm cone woofer with integrated dust cap.
Remove the dust cap at the air inlet.
Shake the bottle carefully and remove the dust cap.
Remove the dust cap and connect the.
Dust cap needs to be removed from the dust cup before the connection.
Only install the type of dust cap on the cylinder.
Place dust cap on cylinder valve outlet whenever.
Be sure to install the valve dust cap after checking or inflating.
The dust cap can be used to give added protection.
A more common approach is to employ the dust cap as a high frequency radiator.
A dust cap covers the connector to help keep it clean.
See also
One kill switch may be provided to check a dust cap on a vehicle receptacle.
Remove the dust cap from the valve connection.
It should not be possible to remove the wheels without pressing on the dust cap.
Replace the dust cap onto the charger jack.
Push the nozzle back onto the bottle and replace the dust cap.
Remove the dust cap from end of pump set.
The USB receptacle may be covered with a dust cap.
Remove the dust cap from the front of the telescope.
The inhaler may not be actuated when the dust cap is in the closed position.
Allow the dust cap and nozzle to dry in a warm place.
Paper cone with IMPP dust cap.
And dust cap.
High Modulus Kevlar reinforced cone and dust cap.
Typically the dust cap is made of the same material as the cone.
To do so, press the lever to unlock the dust cap.
Remove the dust cap and gently pull off the nozzle.
To do so, press the lever to unlock the dust cap and open it.
Attach a dust cap to the lens you removed from the camera.
Your tool is equipped with a standard dust cap for use with with small drill bits.
Place dust cap on cylinder valve outlet when the cylinder is not in use.
Remove the plastic dust cap from the eyepiece O.
The dust cap limits the amount of dangerous loosening that can occur.
Remove the protective dust cap from the diagonal 's barrel.
The dust cap mounts over the distal end of the protective housing.
When using the dust cup, make sure that the dust cap.
Remove the dust cap from the tube and attach the eyepieces.
The top has a small outlet, usually hidden beneath a plastic dust cap.
Includes dust cap to cover mouth piece to reduce the risk of cross contamination.
Replace the access cover, firmly tighten the two screws, and replace the dust cap.
Place dust cap on the cylinder valve outlet whenever the cylinder is not in use.
Description: conn dust cap hrfc series.
The dust cap may also be configured to help produce the desired frequency curve.
Clean engine air fi lter dust cap and check fi lter 12.
The dust cap helps prevent dust and debris from entering the air fitting.
When hammer-drilling overhead, use the dust cap accessory.
You'll also be interested in:
Examples of using Cap
Show more
Retighten the cap to the filter housing
Cap and back panel sheet steel
Do not install cap onto water bottle
Examples of using Dust
Show more
Never wash dust containers or filters in a dishwasher
All challengers will bite the dust
There is an inch of dust covering my whole kitchen
