Examples of 'dust or debris' in a sentence
Meaning of "dust or debris"
Dust or debris: This phrase refers to particles of dirt, filth, or remains that settle on surfaces
How to use "dust or debris" in a sentence
Basic
Advanced
dust or debris
If dust or debris adheres on the image sensor.
Examine if there is dust or debris near driving wheels.
Dust or debris may have accumulated in a machine.
Make sure ventilation slots are clear of dust or debris.
Wipe off any dust or debris on the cartridge.
Location sensor is unaffected by dust or debris.
Excessive dust or debris in surrounding area.
Avoid installation in places where dust or debris will accumulate.
Wipe away dust or debris from the panel hub.
Use a mask as well if the work you are doing produces dust or debris.
Remove any dust or debris from the blower motor area.
Thoroughly clean the air cleaner enclosure of any dust or debris.
Cover all openings to prevent dust or debris from entering engine.
No distinction will be made about the content of the dust or debris.
Wipe away dust or debris from inside of the air box and.
See also
These windows are often damaged by laser heating of deposited dust or debris.
The same is generally true of the dust or debris remaining after detonation.
Vacuum the cover or use canned air to remove any dust or debris.
Clean out any dust or debris before attempting to light the pilot.
Open the thermostat and gently blow out any dust or debris.
Blow away any dust or debris on the lens or use a soft lens brush.
Ensure that the blower motor location is clean and free of dust or debris.
Clean any brick dust or debris from the frame and surrounding areas.
Check that the arc sensors are clean and not blocked by dust or debris.
Clean any dust or debris off the air fi lter using warm water and a brush.
Keep all ventilation slots clean and free from dust or debris build up.
Remove any dust or debris from the Hook and Loop Backing Pad.
Do not plug the power cord into a supply outlet with dust or debris.
These work practices will help prevent dust or debris from getting outside the work area.
They occur when the Earth passes through a cloud of dust or debris.
If dust or debris remains, however, clean the image sensor in the procedure below.
The confined cutter envelope facilitates efficient dust or debris removal and effective guarding.
In addition, the equipment should not be installed in places with excessive dust or debris.
Use a brush or compressed air to remove dust or debris - do not use your hands.
Remove any dust or debris from the Hook and Loop Sanding Base 3.
No one wanted New Horizons to run into unexpected dust or debris.
A vacuum system 14 pulls away dust or debris from the can surface.
Carefully remove the knife, and clean the cutterhead slot of any dust or debris.
Remove any dust or debris from the Hook & Loop Backing Pad 3.
When attaching a new sanding sheet, remove any dust or debris from the sanding plate 4.
Remove any dust or debris from the Sanding Base ( 8 ), before fitting a sanding sheet 2.
Dusting Brush - Use for sweeping up areas with fine dust or debris.
Remove any dust or debris from the Hook & Loop Backing Pad ( 1 ) before fitting a sanding disc 9.
Then, use a clean, dry, chemically untreated cloth to gently remove dust or debris.
You'll also be interested in:
Examples of using Debris
Show more
Or hidden debris to help ensure good footing
The tool is intended for blowing debris
The debris will loosen and fall
Examples of using Dust
Show more
Never wash dust containers or filters in a dishwasher
All challengers will bite the dust
There is an inch of dust covering my whole kitchen
