Examples of 'easybase' in a sentence
Meaning of "easybase"
Easybase is a simplified, user-friendly version of a database that can be easily accessed and managed by individuals without technical expertise
How to use "easybase" in a sentence
Basic
Advanced
easybase
Remove the EasyBase from the car.
Check correct mounting by pulling on the EasyBase.
A loose EasyBase may hurt other passengers in case of an emergency stop.
Refer to the blue circled sticker on the top of the EasyBase.
Do not use the EasyBase in a seat where a frontal airbag is installed.
Always use the anchor leg for safe use of the EasyBase.
Feel free to ask whether the EasyBase is suitable for use in your own car.
The brand and type of car and seat on which the EasyBase is used.
If this is so, the EasyBase can not be secured properly.
The seat belt has to be laid along the blue marks on the EasyBase.
Perform these actions only while the EasyBase is outside of the car.
Congratulations on your purchase of the Maxi-Cosi EasyBase.
Clean all plastic parts of the EasyBase using a cloth, soap and lukewarm water.
Mounting bars for FamilyFix and EasyBase 2.
Additional parameters allow the tiptel easyBASE 28 plus to be set according to your personal preferences.
See also
Do not use lubricants - not even for the moving parts of the EasyBase.
The EasyBase has been approved for installation with three-point belt and anchor leg.
Serial number at the bottom of the orange / white sticker at the back of the EasyBase.
Connect your analogue telephone connection to the tiptel easyBASE 28 plus using the cable supplied.
The tiptel easyBASE 28 plus can be used on two analogue telephone lines with DTMF dialling.
Incoming calls are accepted by the tiptel easyBASE 28 plus.
Place the EasyBase on the car seat 1.
Follow the steps given below to install the tiptel easyBASE 28 plus.
Connect the tiptel easyBASE 28 plus to the power supply.
Click the two pins of the CabrioFix onto the anchor points of the EasyBase 12.
Mount the tiptel easyBASE 28 plus onto the screws.
Please note that no more than 8 handsets can be registered on the tiptel easyBASE 28 plus.
The tiptel easyBASE 28 plus is designed for indoor operation only.
Installing and removing the Maxi-Cosi CabrioFix when used with the Maxi-Cosi EasyFix or Maxi-Cosi EasyBase.
The Maxi-Cosi EasyFix or Maxi-Cosi EasyBase should be installed first of all.
Connect the AC adapter to your tiptel easyBASE 28 plus.
Then enter the PIN for your tiptel easyBASE 28 plus.
Take the CabrioFix off the EasyBase 15.
