Examples of 'ejectors' in a sentence
Meaning of "ejectors"
An ejector is a device used to create a vacuum or to draw in a fluid or gas by means of the Venturi effect
Show more definitions
- plural of ejector
How to use "ejectors" in a sentence
Basic
Advanced
ejectors
Two smoke ejectors next door to them.
It may serve for feeding steam ejectors.
Multiple ejectors are preferably mounted on a movable carriage.
Through the cargo shuttle ejectors.
Two smoke ejectors next door.
Ejectors are well known in the art.
Aircraft missile ejectors use even larger cartridges.
The pistol had dual ejectors.
Air ejectors then take care of the sorting.
The ejector unit comprises one or more ejectors.
The ejectors preferably use ammonia as driving fluid.
The synchronization with the ejectors functions in a similar way.
Soap ejectors have been deleted from this figure.
Metal plate with ejectors.
Special water or air ejectors are used in this technology.
See also
There have been known various kinds of metal disc ejectors.
Special water or air ejectors are applied in this technology.
At least some of these fasteners can be conventional resilient ejectors.
Vacuum ejectors offer energy efficiency.
This was followed ten years later by the incorporation of ejectors.
Pneumatic ejectors are now commonly used in sorting apparatus.
The mould containers are herein mounted individually on the ejectors.
Other ejectors and injectors.
Selective automatic ejectors.
Smoke ejectors may also be used for this purpose.
The molded bathtub is lifted partially out of the mold receptor by ejectors.
Three ejectors could suffice.
Vapor compression may be accomplished using either mechanical compressors or jet ejectors.
Each of these ejectors has a diameter of one or two millimeters.
The part has to stay on the side of the gate ejectors on gate side.
One or more ejectors can be provided per bottom if required.
Certain parts that are difficult to extract require a system of sliding rods called ejectors.
These saliva ejectors have some limits and disadvantages.
And the ribs between channels may be provided with fluidization gas ejectors.
Ejectors have malfunctioned.
In large plants a number of steam ejectors with intermediate condensers are often used.
Ejectors and ejectors.
The break pressures of the ejectors must be sufficient to provide adequate control.
Ejectors yes yes.
The forward and aft ejectors fire and kick it off the wing.
Ejectors in the form of immobile combs are arranged parallel to the cylinders.
The upstream end of each chute is within operational reach of one of the ejectors.
Special ejectors can be rapidly created with the aid of macros.
The compressed air enters the first of these ejectors through a coaxial nozzle.
Several mechanical ejectors may be provided if necessary to overcome this problem.
Increasingly mechanical dry pumps are replacing traditional steam ejectors as the vacuum technology of choice.
Ejectors are rarely used to anything else than the vacuum field.
The water and steam emitted by the ejectors is extremely hot and can scald.
Ejectors can hereby be replaced in simple manner at all mould cavity positions.
Thereby the usual mechanical or pneumatic ejectors in the moulding tool can often be omitted.
