Examples of 'elongation at break' in a sentence
Meaning of "elongation at break"
elongation at break ~ a term used in materials science and engineering to indicate the extent to which a material can stretch or deform before breaking under tension
How to use "elongation at break" in a sentence
Basic
Advanced
elongation at break
Elongation at break and maximum load were recorded.
The average value of elongation at break was calculated.
Elongation at break in a percentage of the initial length.
An elastomer is a polymer having a high elongation at break.
Elongation at break was measured by cross head movement.
Aqueous composition with improved elongation at break.
The elongation at break increases in the same way.
Stiff polypropylene composition with excellent elongation at break.
The elongation at break is indicated as a percentage.
This allows to obtain a still higher elongation at break.
The elongation at break and impact resistance were determined.
Represents the percent elongation at break.
The elongation at break of the film is also good.
Antimicrobial activity was measured and compared to elongation at break.
The elongation at break may be selected depending on applications.
See also
The equipment records the elongation at break of each sample.
Elongation at break after exposure to organic materials is significantly improved.
Average percent elongation at break.
Elongation at break is the measured elongation at the break condition.
This method allows determination of the elongation at break in percents.
A too high elongation at break is not favourable for peelability.
A third advantage is that they have a high elongation at break.
Additionally the elongation at break is enhanced without impact loss.
The material used thus has a high elongation at break.
Elongation at break is also called strain at break or percent elongation.
Measurement of tensile elongation at break.
The elongation at break is good.
Another important parameter of the implement is its elongation at break.
Elongation at break and at yield.
The levels of stress and elongation at break are also very superior.
Elongation at break was determined according to.
The tensile and the percent elongation at break was also recorded.
Elongation at break after heat aging was measured in the following manner.
Increase elongation at break.
Still further preferred particulates are those having an acceptable elongation at break.
Tensile elongation at break of film.
It however has weaker mechanical properties and a high elongation at break.
Their elongation at break is low.
The films were examined for tensile strength and elongation at break.
The elongation at break is still acceptable for the manufacture of gloves.
There were no statistically significant differences in elongation at break between the films.
The elongation at break is recorded as a percent of the original sample length.
The main requirements are a sufficiently high elongation at break and swell ratio.
Elongation at break e r.
El is an elongation at break.
Elongation at break in the transverse and machine directions were obtained on these films.
Figures measured for tensile strength and elongation at break are also presented.
The elongation at break percentage and the stress at the threshold were measured.
Nickel contributes to achieving a high elongation at break and in particular increases the toughness.
The elongation at break remains lower for the converted starch blends.
You'll also be interested in:
Examples of using Break
Show more
First they will break our fingers
And break up with the unloved one
I have made my break from you guys
Examples of using Elongation
Show more
Elongation of the parietal and occipital regions
In order to terminate elongation dephosphorylation must occur
Elongation at half the knot breaking load
