Examples of 'end of hose' in a sentence
Meaning of "end of hose"
This phrase refers to the terminal or final part of a hose, usually indicating where the water or other substance comes out
How to use "end of hose" in a sentence
Basic
Advanced
end of hose
Do not allow end of hose to touch water.
Attach tire chuck or tool to end of hose.
Place end of hose into suitable container.
Check operation by placing hand over end of hose.
Connect tools to end of hose or use hose alone.
Attach wands or tools to the other end of hose.
Insert handle end of hose into extension wand.
Attach chuck or other tool to open end of hose.
Clean out end of hose and reattach to valve.
If there is no suctionat the end of hose.
Take end of hose and line up connection pins.
Loosen lower end of hose strap.
Take end of hose and line up electrical connections.
Remove accessory from end of hose.
Attach free end of hose to swivel adapter on hose reel.
See also
Place desired accessory onto end of hose or wand.
Place handle end of hose into suction end of cleaner.
Connect the metal tube to the curved end of hose.
Vacuum brushes with end of hose handle after use.
Fit carpet nozzle or crevice tool to other end of hose.
Connect other end of hose to the tool of intended use.
Then continue wrapping hose as shown snapping end of hose con.
Insert tool on end of hose until it clicks into place.
Uncoil high pressure hose and attach one end of hose to.
Raise open end of hose above washer and insert funnel.
Remove hose from hose retainer and check suction at end of hose.
Insert handle end of hose into utility valve at power unit.
Uncoil high pressure hose and attach one end of hose to base of spray gun.
Insert round end of hose extension into end of hose assembly.
Optional Attach extension wand to swivel end of hose.
Never permit end of hose to rotate out of the pipe being cleaned.
Optional Attach extension wand to opposite end of hose.
Then place open end of hose in gallon container of clean hydraulic fl uid.
Attach Tough Stain tool to end of hose.
Align end of hose with projections over slots in dirt duct on back of cleaner.
Remove oil drain plug from end of hose and oil fill plug to drain oil.
Place end of hose firmly into tool rack for peak performance when cleaning carpets.
Start with converter end of hose H.
Push male end of hose into quick coupler already installed on the compressor.
Check for suction at end of hose A.
Connect one end of hose to water pump and the other end to spray gun.
Once hose is clear, pull back on end of hose.
Insert locking end of hose into the blowing port of the Vac.
The other end of connection pipe 9 is connected to one end of hose 8.
Insert the larger end of hose into the blowing port of the Vac.
Attach discharge coupler ( 5 ) to other end of hose.
Insert the release button end of hose into the blowing port of the Vac.
The other end of hose or conduit 66 is connected to a pumping device generally indicated as 70.
Blow through opposite end of hose ( 58 ) with fi lter with compressed air.
Insert end of hose ( G ) into hose inlet ( J ) and rotate clockwise to lock in place.
You'll also be interested in:
Examples of using Hose
Show more
Store chemical hose so it is protected from damage
Hose nozzle air suction regulator is open
Disconnect hose from used water tank
Examples of using End
Show more
End poverty in all its forms everywhere
This could be the end of a beautiful friendship
End this before people get hurt
