Examples of 'end of the cover' in a sentence
Meaning of "end of the cover"
End of the cover can refer to the conclusion or finishing point of a book, document, or physical covering
How to use "end of the cover" in a sentence
Basic
Advanced
end of the cover
Push the end of the cover to close it.
Two seemingly holy women lift one end of the cover.
Press the end of the cover until it closes.
A stiffening member 9 may be provided at the closed end of the cover.
The end of the cover.
Simply apply oil at each end of the cover plate.
An upper end of the cover is provided with a through hole.
This thickness is reduced towards the end of the cover opposite to the fixing.
Push rear end of the cover down firmly until it clicks.
FIG . 3 shows in detail a longitudinal section of the distal end of the cover of FIG.
Push the other end of the cover to open the compartment.
The acoustic gel 8 is placed in the closed end of the cover 4.
Clip the back end of the cover in and clip the.
Two further pivoting pins 93 are provided at the lower end of the cover 2.
Note that the bottom end of the cover is at the top of the picture.
See also
The plug rod 6 serves to keep the acoustic gel 8 at the end of the cover 4.
A first end of the cover is rigidly affixed across a first margin of the portal.
To remedy that, the front end of the cover was " slotted.
The end of the cover 3 is bent downward in a bracket shape.
The second holding channel walls 60a may extend downwardly from a distal end of the cover wall 64.
Insert the slanted end of the cover into the slots above the universal connector.
A handle 12 is positioned at a front end of the cover member 10.
Insert the hooked end of the cover into the slots above the universal connector.
An operation portion 54 is formed at the rear end of the cover 51.
A similar opening near the free end of the cover panel also receives the latch extension.
The movable part 14 is located at the end of the cover 9.
W Clip the back end of the cover in and clip the sides into place.
A bottom of the cover base 92 is attached to a moving end of the cover actuator 93.
Positioned on either end of the cover as indicated in figure 9.
The side flanges 91 are provided with ribs 94 near the lower end of the cover 2.
On certain bridges, the end of the cover tube is equipped with a shock absorber.
The catch 120 protrudes laterally with respect to the cover, at one end of the cover.
The open proximal end of the cover envelopes the inner shield, needle cannula and hub.
The cover 24 includes a first side 32 which lies generally at one lateral end of the cover 24.
At the upper end of the cover 2 there are provided two pivoting pins 92.
On this support 43 the end of the cover 41 of the bowden cable is mounted.
A free end of the cover 41 is attached to another upstanding post 34.
A front end of the cover member 68 is fixedly coupled to the handle body 67.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using End
Show more
End poverty in all its forms everywhere
This could be the end of a beautiful friendship
End this before people get hurt
