Examples of 'end of the hose' in a sentence
Meaning of "end of the hose"
The end of the hose refers to the farthest point or extremity of a hose. It can be used both literally, for example, when talking about the end of a garden hose, or figuratively to describe the point of completion or finality
How to use "end of the hose" in a sentence
Basic
Advanced
end of the hose
The other end of the hose was connected to.
The nozzle at the end of the hose.
If the end of the hose is submerged.
Place the open end of the hose.
Put the end of the hose over a drain or bucket.
Avoid submerging the end of the hose.
Clip the end of the hose into the elbow bracket.
Place a large container at the end of the hose.
At the inserted end of the hose there is a nozzle.
Attach the cleaning tool to the end of the hose.
Attach the other end of the hose to a source of vacuum.
Clean the filter at the end of the hose.
Cut the end of the hose diagonally to prevent drop formation.
Insert the larger end of the hose intothe.
An end fitting is preferably provided at each end of the hose.
See also
Place the other end of the hose into a.
One end of the hose should be left out of the pool.
The other end of the hose.
Attach the extension wands to the accessory end of the hose.
Run the other end of the hose into a drain.
Place the crevice tool on the end of the hose.
They stick one end of the hose on the hydrant.
Attach one of the accessories to the other end of the hose.
Locate the other end of the hose at the drain point.
You will find two connections at either end of the hose.
Thread the other end of the hose to the spray gun.
A plurality of tools are provided for fitting to the end of the hose.
Connect the other end of the hose to the water intake.
Use the drain hose form to raise the end of the hose.
Insert the male end of the hose into the large.
Connect the telescoping extension wand to the handle end of the hose.
Connect the other end of the hose to your pressurized water.
This will allow you to remove the bottom end of the hose.
Place the open end of the hose over a floor drain.
Closing the end consists of making a seam at one end of the hose.
Insert the larger end of the hose into the tank.
Pistols are used to control water flow at the end of the hose.
The free end of the hose should not be under water.
Then attach it to the end of the hose handle.
Leave this end of the hose attached to the bellows nozzle.
Push the accessory on to the end of the hose handle.
The flared end of the hose must be connected to the unit as illustrated.
Push the accessory onto the end of the hose handle.
The other end of the hose leads to a waste container for solvents.
Ensure the rubber seal ring is properly seated in the end of the hose.
Unscrew the other end of the hose from the back of.
Attach the crevice tool or the dusting brush to the end of the hose.
Insert the curved end of the hose into the vacuum.
If necessary rapidly lift your hand on and off the end of the hose.
Then connect the other end of the hose to the faucet diverter.
You'll also be interested in:
Examples of using Hose
Show more
Store chemical hose so it is protected from damage
Hose nozzle air suction regulator is open
Disconnect hose from used water tank
Examples of using End
Show more
End poverty in all its forms everywhere
This could be the end of a beautiful friendship
End this before people get hurt
