Examples of 'end of the pipe' in a sentence
Meaning of "end of the pipe"
is a phrase commonly used in environmental or engineering contexts, describing the final stage or output of a system or process. It refers to the point where materials, waste, or information is discharged or delivered, often after passing through various stages or components
How to use "end of the pipe" in a sentence
Basic
Advanced
end of the pipe
Contain the open end of the pipe.
The end of the pipe was closed with a plug.
What appeared to be extension on the end of the pipe.
Stick the open end of the pipe into a window.
Local governments sit at the end of the pipe.
At the end of the pipe.
The princess laughed on the other end of the pipe.
Rotate the end of the pipe to heat it equally on all sites.
A first buffer chamber is provided at one end of the pipe.
Connect the other end of the pipe to the water mains.
Turn carriage handwheel to move the reamer to the end of the pipe.
The cut end of the pipe is inserted into the adapter.
A sealant is preliminarily applied to the end of the pipe or fitting.
On one end of the pipe is a dispensing head for the polymer.
Competitors gradually ski to the end of the pipe by doing flips and tricks.
See also
One end of the pipe was covered with blood from the victim.
Water hammer is generated by closing a valve at the end of the pipe section.
A few taps on the end of the pipe usually fixed this.
Now put that tin can over the end of the pipe.
Protect the open end of the pipe against dust and moisture.
Adapted for the mounting of various tools at the end of the pipe.
Many times this end of the pipe has a sheet guard or metal screen.
Drill some small holes around the end of the pipe connector.
The first end of the pipe is situated lower than the second end.
The tubes may extend past at least one end of the pipe.
A filter at the end of the pipe for blower should be installed and changed periodically.
Thereafter the inner sleeve is fitted into the end of the pipe.
This ensures that the lower end of the pipe remains above the hopper.
Thereafter the outer sleeve is fitted onto the end of the pipe.
The foam extruded from the end of the pipe has a smooth glossy surface.
Turn carriage handwheel to move the die head to the end of the pipe.
The other end of the pipe discharges directly to the environment or into a chimney flue.
An increase in pressure causes the closed end of the pipe to describe an arc.
At the very end of the pipe there are some Pipebombs.
One method is to use a piece of suitable material across the end of the pipe.
The wall thickness at this outlet end of the pipe is the thicker wall thickness.
There are also other possible solutions for shaping the end of the pipe.
Clean one end of the pipe and apply the PC cement.
Arrows indicate a vector normal to the reflector plane at each end of the pipe.
B Connect the other end of the pipe to the water inlet and tighten the nuts.
This produces a cleaner separation of the solvent from the end of the pipe.
First step, clear both end of the pipe fittings.
Another pipe has a coupling bell for receiving the distal end of the pipe.
Place the other end of the pipe in a drain, ensuring that.
The plastic coating is also cutback from the end of the pipe to be welded.
Place the other end of the pipe in a drain, ensuring it is not coiled.
The compression band is then fitted onto the attachment end of the pipe fitting.
One end of the pipe is connected to a supply of inert gas, such as nitrogen.
Check to see if water and debris come out the other end of the pipe.
At an end of the pipe protruding into the tank, a rotary jet head is affixed.
You'll also be interested in:
Examples of using Pipe
Show more
Pressure transmission pipe in the combustion chamber
Pipe is the heaviest wave in the world
Two pieces of pipe and a bicycle chain
Examples of using End
Show more
End poverty in all its forms everywhere
This could be the end of a beautiful friendship
End this before people get hurt
