Examples of 'end of the shaft' in a sentence
Meaning of "end of the shaft"
The end of the shaft refers to the termination point or outermost part of a long, narrow object, such as a rod or stick. It is the point farthest away from the base or handle of the object
How to use "end of the shaft" in a sentence
Basic
Advanced
end of the shaft
The upper end of the shaft is connected.
The cartridge is sealed at each end of the shaft.
The anterior end of the shaft fold is blunt.
An adjustment head is arranged on a distal end of the shaft.
Bump the end of the shaft with a plastic hammer.
Place the nut on the end of the shaft.
At the other end of the shaft are a handle and a switch.
A handle is provided at the proximal end of the shaft.
The other end of the shaft is placed in a second cavity.
A tool assembly is disposed on a distal end of the shaft.
The lower end of the shaft is supported in a lower bearing.
Key is even with the end of the shaft.
The end of the shaft where the oil supply.
The lint filter is attached to the end of the shaft.
The distal end of the shaft may be connected to a coupling section.
See also
Remove the lock pin at the end of the shaft.
The assembly at the end of the shaft holding the battery pack.
Pull the collet out of the end of the shaft.
Insert the end of the shaft in the plastic bushing and adjust.
And the prints are only at the end of the shaft.
The other end of the shaft portion is insulated from the waveguide.
A rotatable collar is fixed to the free end of the shaft.
Never immerse the collet or end of the shaft in a solvent or in water.
A cam follower is provided at the distal end of the shaft.
Gears couple one end of the shaft to the fastener drive member.
Insert the needle up to the stop at the end of the shaft.
The other end of the shaft portion is inserted into the waveguide.
Check that the cap at the end of the shaft is open.
At the end of the shaft two rollers are provided which are received by rails.
A folding handle extension is coupled to the other end of the shaft.
A special seal is adopted at the end of the shaft to ensure that no leakage.
Another overhung bearing is used at the opposite end of the shaft.
One end of the shaft and a spring is provided in the holder body.
The upper die is abutted by the lower end of the shaft.
The end of the shaft has a threaded área which engages a pinion.
A pair of jaw members are disposed at the distal end of the shaft.
A proximal end of the shaft may be coupled to a housing having a handle assembly.
Direction of rotation is seen from the driven end of the shaft.
On some cars the inner end of the shaft is hidden behind a rubber gaiter.
Remove the spacer and wing nut at the end of the shaft.
One working end of the shaft is arranged distally with respect to the base.
Tension of the arm towards the end of the shaft opposite.
The top end of the shaft should protrude through the hole in the lid.
A handle is fixed to the rear end of the shaft to operate the same.
Engagement formations may be provided on or adjacent the distal end of the shaft.
You will be getting the short end of the shaft with that cost.
A generally annular shaped electrode is disposed at the distal end of the shaft.
Outside the valve on the end of the shaft there is the lever with counterweight.
Loosen the set screws on the pulley at the end of the shaft.
The end of the shaft bearing has a protective element to allow rotation of the latter.
You'll also be interested in:
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
Examples of using End
Show more
End poverty in all its forms everywhere
This could be the end of a beautiful friendship
End this before people get hurt
