Examples of 'end of the tool' in a sentence
Meaning of "end of the tool"
end of the tool: This phrase usually refers to the tip or extremity of a tool, where the main action or function occurs
How to use "end of the tool" in a sentence
Basic
Advanced
end of the tool
A handle is forming a second end of the tool.
Rotate the lower end of the tool to the edging position.
Do the same on the opposite end of the tool.
Rotate the lower end of the tool to the trimmer position.
Clean and grease the insertion end of the tool.
Insert the thin end of the tool through the keyhole.
Clean and grease the shank end of the tool.
The end of the tool may further occupy any intermediate configuration.
The handle end of the tool.
Depress the latches on each side of the upper end of the tool.
Coat the end of the tool shaft with a light coat of machine grease.
Never place your fingers or hands over muzzle end of the tool.
The end of the tool is preferably adapted to interact with the tyre bead.
Moving the ball mechanically drives the distal end of the tool.
Grease the insertion end of the tool reg-ularly.
See also
Make sure that the mark is visible on the top end of the tool.
Grease the shank end of the tool regu-larly.
Pull the protective sleeve off toward the front end of the tool.
The end of the tool having the convex surface 3 is hollow.
Determining the pixel of the axis of symmetry corresponding to the end of the tool.
This will eventually distort the top end of the tool making it harder to use.
The connecting means may include a threaded connection located at each end of the tool.
The smaller 8 inch diameter end of the tool is attached to a dredge pump.
Cutting insert as represented above, fixed to one end of the tool body.
Often, the end of the tool does not penetrate past the original sinus boundary.
The collet nut is threaded onto the end of the tool shaft or spindle.
The end of the tool with anti-silp design make it easier for disassembling.
Slide the shield back toward the trigger end of the tool and lift it off.
Preferably, the receiving end of the tool has a receptacle 30 with substantially rigid opposing side walls.
To exit press the EXIT symbol at the end of the tool bar.
Figure 6 depicts the distal end of the tool assembly of the embodiment of Figure 1.
The distal end-piece is positioned at the distal end of the tool.
Only a front end of the tool holder 2 is shown in Fig 4.
There is a worklight 9 located on the end of the tool near the shoe.
The front end of the tool parses C55x disassembly code.
The tool comprises a stabilizer 19 near the open end of the tool body.
The second end of the tool holder arm 35 is connected to a removal tool 37.
The cutting tool 915 is attached to the end of the tool holder by conventional means.
Moving the flexible body 409 results in actuation of the distal end of the tool.
Alternatively, the end of the tool may be parallel with the bottom 119 of the device.
The computer 18 compares the theoretical and measured positions for notably each end of the tool 4.
Consequently, extension 16 is translated toward the distal end of the tool assembly 12.
You'll also be interested in:
Examples of using Tool
Show more
The tool is intended for blowing debris
Have your power tool ser v iced by a
Tool operates erratically or appears to be losing power
Examples of using End
Show more
End poverty in all its forms everywhere
This could be the end of a beautiful friendship
End this before people get hurt
