Examples of 'end plate' in a sentence
Meaning of "end plate"
The term 'end plate' refers to a flat, usually rectangular, surface at the end of an object or structure. It is often used in engineering and construction to describe the final or terminal part of a component or piece of equipment. The end plate provides stability, support, or a point of connection for other elements
How to use "end plate" in a sentence
Basic
Advanced
end plate
Install the left end plate as follows.
The end plate couples to a valve housing.
Install the right end plate as follows.
An end plate bore is in each end plate.
Remove interior end plate from heater.
The end plate is completely intact.
Remove the two upper end plate screws.
The end plate may be at the battery can.
Replace remaining end section and end plate.
The end plate consists of two parallel webs.
A mounting sleeve is attached to the end plate assembly.
Remove remaining end plate from other end of heater.
A partial plan view of an end plate.
Normal end plate function can be blocked by two mechanisms.
The tube is also provided with an end plate.
See also
Miniature end plate potentials presented a biphasic response to procainamide.
The rack is completed by mounting the second end plate.
Only an end plate of the assembly is visible in the drawings.
The invention therefore provides an end plate to the sleeve.
Remove opposite end plate and shaft by pulling straight out.
The postjunctional receptor is called the motor end plate.
Motor end plate.
Compression screws holding pressure against the end plate.
There is preferably only one end plate according to the invention.
The cylinder is formed in one piece with an end plate.
A dome closure has an end plate assembly and a dome cover.
The end plate is preferably configured to permit this external operation.
Opposite to the first end plate is the second end plate.
Slide the lamp out through the reflector end plate.
Measure the end plate thickness using a micrometer with a domed anvil.
Locking and condition of end stops and end plate sets.
Bolts for fixing the end plate are installed in the profile slot.
At least one groove is located on an inner face of each end plate.
The inside of each end plate is partially submerged in the electrolyte solution.
A plate is received in a sleeve which extends downwardly from an end plate.
The sleeve is secured to the end plate when the tube is fixed.
Each end of each bearer is preferably closed by a rectangular end plate.
The end plate may be rotationally fixed relative to the weight assembly.
Secure the angle bracket with previously removed end plate screws.
Always use the stop end plate supplied with the gear unit.
This assembling method was achieved on a metal sheet forming an end plate of an exchanger.
Tube end plate for heat exchanger with tubes and water boxes.
The mass will then rebound from the first end plate.
The end plate is preferably sealed within the ends of the sleeve in use.
The pressure plate is preferably operable by hand externally of the end plate.
The end plate does not engage the arcuate surface of the anilox roll.
The inner surface of each end plate faces the heat transfer plates.
Insert he assembly into the air tube using the end plate as a guide.
A relatively rigid end plate includes angled shoulders which engage the blades.
The presence of a heat exchange tube in a reservoir in the end plate is relatively voluminous.
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using End
Show more
End poverty in all its forms everywhere
This could be the end of a beautiful friendship
End this before people get hurt
