Examples of 'ends of the wire' in a sentence
Meaning of "ends of the wire"
ends of the wire: This phrase can be used literally to refer to the physical ends of a wire, or metaphorically to represent the extreme or outer limits of something
How to use "ends of the wire" in a sentence
Basic
Advanced
ends of the wire
Strip the two ends of the wire.
Both ends of the wire are weld terminated.
First we have to clip off one of the ends of the wire.
The free ends of the wire are placed in an electrolytic solution.
A blob of soft lead is used to crimp the ends of the wire bundle.
Thereafter both ends of the wire are embedded in a piece of lead.
This diametral groove serves for twisting these ends of the wire.
The ends of the wire may be connected to terminals by nipping or soldering.
Ferrules may be provided to secure the ends of the wire in the handle.
Connect the two ends of the wire to the terminals of the base.
These would have been created in wax around the ends of the wire.
The ends of the wire were secured to the pin jig with screws.
Install the connector block on the ends of the wire and secure it with a screwdriver.
The two ends of the wire yoke are then pressed outwards and lifted upwards.
It produces a voltage V between the opposite ends of the wire.
See also
Press the ends of the wire together at the free end of the handle.
However, it is recommended to protect the ends of the wire.
Twist the two ends of the wire together to close the electron orbit circle.
I believe that on some wires, you will see the two ends of the wire.
Cut the two ends of the wire to a length that 's appropriate.
Device according to claim 3, wherein the ends of the wire sections are free.
As such, both ends of the wire are slightly burred in the same direction.
This will make it a rough, and the ends of the wire will not be visible.
The two ends of the wire are connected to electrical supply leads 5 and 6 or cables.
A metal plate 8 is rigidly fixed between the free ends of the wire portions 22.
The two ends of the wire 29c are retained outside the tool.
In a 1D proportional detector, pulses are detected at both ends of the wire.
Insert the ends of the wire shelf ( M ) through the lower holes in the legs J.
The portion ( s ) capable of being grasped correspond to the ends of the wire 44.
The ends of the wire are connected to electrical terminals 40 and 42.
A nose cone 30 is positioned on the distal ends of the wire members 18.
The two ends of the wire 1 are curved to form two pairs of loops 2, 3.
For example, in some embodiments, the ends of the wire 10 are exposed.
The ends of the wire heating element 112 are coupled to the electrical connector block 42.
Attach the wheels ( L ) to the ends of the wire shelf ( M ) using the lock nuts M8.
You'll also be interested in:
Examples of using Ends
Show more
Take the ends of the hair fig
Ends designed to facilitate continuous row mounting
Check that both ends are correctly plugged in
Examples of using Wire
Show more
Steel wire liners can be coated or noncoated
Use a passage aid wire or previous cord
Cut wire liner at the right length
