Examples of 'engine speed' in a sentence
Meaning of "engine speed"
Engine speed refers to the rate at which an engine's crankshaft rotates, typically measured in revolutions per minute (RPM). It indicates how quickly the engine is running and is often used to describe the performance or capabilities of a vehicle or machinery
How to use "engine speed" in a sentence
Basic
Advanced
engine speed
The engine speed is preset on this type.
Do not alter the engine speed governor.
The engine speed is set by the factory.
Adjustment of maximum engine speed is not necessary.
Engine speed with running cutting device.
Do not increase engine speed unnecessarily in reverse.
Engine speed is too slow to till well.
According to the engine speed to reduce the.
The engine speed is limited to idling speed.
Depress stop lever on engine speed control.
Setting engine speed stopping the engine.
Maximum engine torque at actual engine speed.
Nnormi an engine speed normalized by dividing it by nPmax.
Gradually decrease the engine speed to an idle.
Your engine speed has been factory set.
See also
The throttle lever controls engine speed.
Estimated engine speed rotations per minute.
Pump output is controlled by adjusting engine speed.
Optional engine speed and load information.
Use caution when checking engine speed.
Vary the engine speed of the motorcycle.
Service and adjustments engine engine speed.
Use a high engine speed full throttle.
The throttle trigger controls engine speed.
Engine speed controlled by hand throttle lever.
This speed is in turn a function of engine speed.
Reduce the engine speed to idling rpm.
It is more particularly adapted to low engine speed.
The exact engine speed is not critical.
This frequency is termed the engine speed.
Engine speed required to achieve maximum productivity.
There is no pressure request at idle engine speed.
The engine speed is allowed to return to idling.
Variation of engine torque with engine speed.
Engine speed changes with a uniform ride.
Never raise the engine speed without load.
The engine speed control is realised by software.
Engage stop to reduce engine speed when mowing.
Engine speed control device and method.
Do not reduce engine speed while throwing snow.
Engine speed is used to determine a belt tension.
Increase the engine speed to maximum.
Engine speed at idle speed min.
Derivative of the engine speed at the set point.
Engine speed check for high speed test.
Definition of target engine speed setpoints.
The engine speed is set for fast.
Driving with any lower engine speed is prohibited.
Move engine speed control to the run position.
So when upshifting the engine speed must go down.
You'll also be interested in:
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
Examples of using Engine
Show more
I started the engine and sped off
An engine shall be remapped prior to a test cycle if
Always stop the engine before unclogging
