Examples of 'envelope signal' in a sentence
Meaning of "envelope signal"
envelope signal - In the context of communication or technology, an envelope signal refers to a signal that contains important information about a message, such as its starting point, endpoint, and any necessary control data
How to use "envelope signal" in a sentence
Basic
Advanced
envelope signal
Their impact on the envelope signal is shown.
An envelope signal corresponding to the empty reservoir is shown.
This will result in a different envelope signal.
The reference signal is an envelope signal sent by an envelope detector.
The envelope signal is a measure of the momentary air flow.
Based on the envelope signal.
The envelope amplifier provides a second supply current based on an envelope signal.
These are determined from the envelope signal as described below.
These chips then modulate the carrier in phase or in frequency of a constant envelope signal.
Based on the envelope signal and the boosted supply voltage.
Modulated constant envelope signal.
The envelope signal E changes to the inactive state.
The converse is true when the envelope signal decreases.
The control signal may represent more significant directional changes in the first envelope signal.
The AC component of the envelope signal is multiplied by the two quadrature phased signals.
See also
This signal indicates the direction in which the envelope signal must vary.
Evaluating an envelope signal of the vibratory signal ;.
Also for this embodiment several samples may be selected from the envelope signal.
The amplifier DAMP receives the envelope signal SE at its negative input.
In some embodiments the power supply modulation signal may be the input envelope signal.
Step of evaluating an envelope signal of the vibratory signal ;.
The envelope signal for a channel is shown in figure 3 together with the original signal.
A second envelope detector unit is provided to derive a second envelope signal from the input signal.
A sample of the envelope signal is selected using some criterion e . g.
The offset may also be determined based on the envelope signal and / or other information.
Obtaining a lower envelope signal of the input signal for a current time period ;.
The method of claim 1, comprising modulating a carrier signal in accordance with the envelope signal.
Evaluation means for evaluating an envelope signal of the vibratory signal ;.
Obviously, the envelope signal is sampled and presented, but the temporal fine structure is lost.
In this case, the sign bit and the quantized envelope signal are both binary signals.
The two constant envelope signals are then combined to a single two-level constant envelope signal.
The selected cycle is stored and cross-correlated with the rest of the envelope signal.
The op-amp may receive the envelope signal and provide an amplified signal.
The envelope signal of the transmitted elementary signal is then defined by the expression, EQU2.
In this case, the derivative of the envelope signal may be continuous throughout the burst.
The envelope signal is typically amplified in an envelope amplifier 70.
In a further step, after beamforming, the envelope signal is extracted.
This modified envelope signal E ' can also be seen as an envelope error signal.
The envelope generator outputs an upper and a lower envelope signal 10 and 11 respectively.
In a first step 100, an envelope signal representative of the envelope of a radiofrequency signal is determined.
A first envelope detector unit 108 is provided for deriving a first envelope signal from the input signal.
Comparing a power value of the envelope signal with a first threshold value to provide a comparison ;.
The output signal of the adder SK.3 is the envelope signal PK.
Modulator 112 may provide an envelope signal indicative of the envelope of the output samples.
The envelope signal / E and the bit Q 1 are applied to the input of the NAND gate 75.
The module 12 compares the gain value of the envelope signal S 2 with a threshold value K 1.
Calculating an envelope signal ( IDE ) indicative of the envelope of said detection signal ;.
A method according to claim 24 wherein the envelope signal e ( t ) is compressed to approximately 30 dB.
FIG . 11B shows an envelope signal ES extracted from the signal US by the circuit UTED.
A second envelope signal may be generated at block 424.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
Examples of using Envelope
Show more
We found the envelope and the money
An envelope for strategic priorities strategic fund
Check out the envelope on the counter
