Examples of 'euroblock' in a sentence
Meaning of "euroblock"
Euroblock is a term used to describe a system of blocking or restricting European integration or cooperation
How to use "euroblock" in a sentence
Basic
Advanced
euroblock
Euroblock connectors wiring diagram is the following.
Equipped with balanced inputs on Euroblock connectors.
Euroblock connector and spring loaded input terminals.
The signal input connectors are Euroblock type.
Euroblock connector should be wired as indicated.
The signal output connectors are Euroblock type.
Euroblock connectors for analogue audio inputs and outputs.
Ensure correct polarity in the Euroblock terminals.
Use the included Euroblock connectors to connect the inputs on the rear panel to your.
Emergency input with level control on Euroblock connector.
Two Euroblock connectors one per cabinet.
Pay attention to the correct polarity of the Euroblock terminals.
Euroblock balanced stereo input in MASTER unit.
Balanced mono master output Euroblock connector.
Using a Euroblock Connector see the side graphic.
See also
Outputs also feature Euroblock connectors.
Euroblock balance stereo input on the MASTER UNIT.
Output connections The output section on the rear panel features Euroblock connectors.
Euroblock connector stereo / mono selection for each output via software.
Those signals are balanced and available in the same GENIO unit using Euroblock connectors.
Output mute ” input on Euroblock connector closed contact mute.
Link between the MASTER and the SLAVE unit via Euroblock connectors.
Inputs, Use Euroblock connectors to connect these zone inputs to your audio sources.
The amplified OUTPUT uses a Euroblock connector.
Insert the pre-wired Euroblock connector, ensuring the correct polarity is being used.
Stereo audio input with RCA and Euroblock connectors.
Euroblock connectors for preset recall, DC remote level control, and serial data control.
Input allows connection to telephone paging system via a detachable 3-pin Euroblock connector.
Line Outputs, Use Euroblock connectors to connect your loudspeakers to these outputs.
Connect these outputs to your speakers using a properly wired 4-pin Euroblock connector and speaker wire.
Outputs, Use Euroblock connectors to connect these zone outputs to your loudspeakers.
Equipped with balanced inputs on XLR3 and Euroblock connectors and Euroblock output connectors.
Two 3 terminal Euroblock connectors for stereo balanced INPUT Two jumpers for configuring the input sensitivity.
The signal input connectors are three pin Euroblock connectors 11.
Euroblock connectors for inputs and outputs input 1 has also a XLR type connector for MIC / LINE L signal.
BAL, select the stereo balanced Euroblock input as the audio input source.
Euroblock balanced input in line 2 right R channel 9.
Mute Connector, Use a 2-pin Euroblock connector to attach a switch to this connector.
Euroblock balanced input in line 2 left I channel 8.
MIC / LINE balanced inputs, with Phantom Power and 3 sensitivity levels, Euroblock connector.
Use this 5-pin Euroblock to connect to an optional remote control.
TEL / PAGE INPUT allows connection to a paging system via detachable 4-pin Euroblock connector.
This male 5-pin Euroblock connector accepts microphone or line-level signals.
Blocks to be made by euroblock 12.
This 4-pin male Euroblock connector accepts microphone or line-level signals and offers selectable phantom power.
The outputs ( 11 ) are located on the front panel with Euroblock connectors.
Double INPUT / STACK connector, Euroblock + Speakon type, with security attachment screws to avoid accidental disconnection.
Earth > Terminal INPUT 5 to INPUT 8, mono balanced microphone or line signals, with Euroblock 3-contact connector.
Euroblock Forum 2017, The international pallet industry welcomed the invitation of the market leader from Unterbernbach.
New offers for Prometal Euroblock 12 by mail.
