Examples of 'exit programming' in a sentence
Meaning of "exit programming"
exit programming: To stop coding or developing software applications by either closing the program or ending the programming session
How to use "exit programming" in a sentence
Basic
Advanced
exit programming
Always exit programming mode before flying.
Press the button to exit programming mode.
To exit programming press the key.
Press the pad to exit programming mode.
Exit programming mode by pressing any remote control button except.
To select the ring tone and exit programming press key.
Exit programming is terror.
Turn the ignition key off to exit programming mode and save settings.
Use to exit programming mode and stop cooking during cooking cycle.
Some of the changes do not become active until you exit programming mode.
Press the continuous key to exit programming or to continue programming other dose keys.
Exit programming mode The settings are now stored.
Lock programming mode Press this key to exit programming mode.
Exit programming mode Exit advanced programming mode.
Press STOP pad or close oven door to exit programming mode.
See also
Exit programming mode The set parameters are stored on the detector.
Press and release the TTC button to exit programming mode.
Exit programming by pressing HOME once.
Press RESET pad or close oven door to exit programming mode.
To exit programming mode, proceed as follows.
Press the SET key one more time to exit programming.
Press to exit Programming.
The indicator lamp will flash continuously two times per second until you exit Programming Mode.
Cycle power to exit Programming Mode.
To exit programming sites, proceed as follows.
Press the MENU button to exit programming.
To exit programming mode, turn off track power by pressing the stop button.
Press the Program button for three seconds to exit Programming mode.
The machine will automatically exit programming if no key is pressed for about 20 seconds.
Press and hold FUNCTION for 3 seconds to exit programming.
After you exit programming mode, press the appropriate source button to use your source.
Long press the PTT button again to exit Programming Mode or turn OFF the radio.
When you exit programming mode, the last settings selected for each programming procedure are saved.
After you enter the required values, exit programming mode.
Exit programming mode Blue LED goes out ; the settings are now stored.
Press and hold the FUNCTION button for 3 seconds to exit programming.
To exit programming mode, press and hold the BUTTON until the blue LED blinks.
Press and hold the PROGRAM button for 3 seconds to exit programming mode.
How do I exit programming mode when I am in the middle of it?
Press the Program button for 3 seconds to exit Programming mode.
To exit programming mode, wait 5 seconds without pressing any key.
After making settings for the detector channels, exit programming mode by pressing ESC / DEL.
NOTE, If no activity within 30 seconds the radio will automatically exit programming mode.
The system will automatically exit programming mode after 15 seconds if no keys.
Turn the ignition key to the “ off ” position to exit programming.
If left untouched, unit will exit Programming mode after 30 seconds.
You may continue programming other user codes, or press [ CLEAR ] to exit programming mode.
After training all detectors, exit programming mode by pressing ESC / DEL twice.
Turn the key to the " off " position to exit programming mode.
Press the [ ] key twice to exit programming.
You'll also be interested in:
Examples of using Exit
Show more
Please exit for the next customer
I just saw you exit that bar
Exit all running programs before installation
Examples of using Programming
Show more
Convenient sequence programming with graphic symbols
Programming mode only for physical address
This is a simple programming system for recorders
