Examples of 'exothermic peak' in a sentence
Meaning of "exothermic peak"
Exothermic peak: Refers to the highest point in a chemical reaction where heat is released to the surroundings
How to use "exothermic peak" in a sentence
Basic
Advanced
exothermic peak
The exothermic peak due to recrystalisation is measured.
The integrated energy under an exothermic peak is related to the extent of cure.
The exothermic peak due to recrystallisation is measured.
The recorder was started and the test was continued until the exothermic peak was reached.
The exothermic peak generated by the polymerization is also lowered.
The heat capacity of crystallization was determined from the exothermic peak during this process.
A second exothermic peak is at approximately the melting point of aluminum.
The resin system starts the hardening process automatically while passing through an exothermic peak.
The exothermic peak which appears corresponds to the cold crystallization of the material.
Now, since the polymerization is a radical polymerization, it gives rise to an exothermic peak.
The above mentioned exothermic peak represents a residual enthalpy existing in the film.
This " cold " crystallization is observed as a small exothermic peak or dip in the curve.
The first exothermic peak matches with the vertical line on the expansion profile.
An endothermic peak and an exothermic peak appeared from 260 °C.
The exothermic peak temperature was recorded as the Tc.
See also
This decomposition is displayed by an exothermic peak after melting situated in the vicinity of 220 ° C.
An exothermic peak indicated that most of the H2O2 had decomposed under atmospheric pressure.
The formation of wulfenite occurs at 520 °C, as observed in the exothermic peak.
The exothermic peak temperature was regarded as Tc.
Tc ( °C ), determined from the maximum value of the melting exothermic peak of crystals.
At 486 ° C an exothermic peak is indicative for phase transition to a crystalline fluoride.
The temperature of the exothermic peak in this case is 32 ° C.
Exothermic peak temperature Tp of the obtained epoxy resin composition based on DSC was 152 °C.
The temperature of the exothermic peak in this case is lowered by 10 ° C.
The exothermic peak temperature Tp is measured by DSC at a heating rate 10°C/min.
In general, the exothermic peak takes place about 5-20 minutes after introducing the initiator systems.
The exothermic peak at approximately 150°C under atmospheric pressure indicated mostly H2O2 decomposition.
You'll also be interested in:
Examples of using Exothermic
Show more
Thus an uncontrolled exothermic reaction does not occur
The exothermic decomposition energy may be estimated
The reaction is exothermic gives off heat
Examples of using Peak
Show more
Week at peak losses death and cull
I am prepared to give you a little sneak peak
Active hedging of peak exposures through retrocession
