Examples of 'expansion ratio' in a sentence
Meaning of "expansion ratio"
This phrase is commonly used in the context of engineering or physics to describe the ratio of the final volume to the initial volume of a gas or substance during an expansion process
How to use "expansion ratio" in a sentence
Basic
Advanced
expansion ratio
The expansion ratio of rubber gaskets is relatively small.
The foaming at a high expansion ratio was also proven.
Expansion ratio and settling time.
This contributes to an increase in expansion ratio.
The expansion ratio after combustion still remains high.
The amount of level reduction is determined by the expansion ratio.
The expansion ratio is controlled simply by the water quantities.
This is particularly important where a high expansion ratio is required.
The expansion ratio is therefore nearly independent of this profile.
The quantity of swelling agent is a function of the desired expansion ratio.
Expansion ratio is used in the context of liquefied and cryogenic substances.
Nozzle expansion ratio.
Hole expansion testing was also performed to measure hole expansion ratio.
This expansion ratio was used as the limiting hole expansion ratio.
The combustion chambers are sized to establish the expansion ratio of the engine.
See also
The hole expansion ratio was calculated using the equation below.
The resulting expanded polyolefin resin particles tend to have a lower expansion ratio.
The expansion ratio in all cases is greater than the compression ratio.
An actual time vary with a thickness of the molded article and an expansion ratio.
Choice of the optimum expansion ratio for an ascent flight through the atmosphere.
A high compression ratio can be viewed as a necessary evil to have a high expansion ratio.
The expansion ratio in stage c can be lower than the expansion ratio in stage e.
This entails the likelihood that only a foamed body of low expansion ratio will be available.
The expansion ratio of the engine is therefore larger than its compression ration.
The Miller cycle engine usually has a volumetric compression ratio lower than its volumetric expansion ratio.
The expansion ratio of the foam sheet is increased or decreased by the heating temperature.
At lower pressures Natural Gas do not have expansion ratio.
The expansion ratio is defined by the ratio of specific foam volume to polymer volume.
Table 1 illustrates the theoretical expansion ratio of ammoniacate complexes.
The large expansion ratio also allows the stent to be used with smaller incisions.
This apparatus enables polyethylene sheets to be extruded at an expansion ratio equal to 2.
The expansion ratio was calculated from the measured values according to the following equation.
This also increases the expansion ratio of the low-pressure turbine.
The expansion ratio of liquefied and cryogenic from the boiling point to ambient is,.
Particularly, products with a high expansion ratio are more vulnerable to these factors.
Indeed, this thickness of the sealing portion is critical considering the expansion ratio.
Moreover, the expansion ratio of the foam molded product is lowered.
In those applications, high strength together with good hole expansion ratio is required.
Therefore, the expansion ratio is also increased as the engine load becomes lower.
Therefore, expansion during foaming is not disturbed, so that the expansion ratio is increased.
When the expansion ratio is smaller than 3 times, the cushioning property is insufficient.
However, the wrist strap suffers the disadvantage of a relatively low expansion ratio.
The contraction angle, expansion ratio and length of axial outlet port are key parameters.
The cell state of the foamed article was evaluated, and the expansion ratio was measured.
The expansion ratio is a product-specific characteristic and a function of the chemistry of the intumescent material.
This distance, divided by the original spacing yields a local measure of the expansion ratio.
This causes a variation of the expansion ratio of the internal flow, which induces a maximum thrust.
Further, the vascular prosthesis stent has a compressed profile which is independent of its expansion ratio.
In fact, such structure gives a smaller expansion ratio but can withstand much higher pressures.
The expansion ratio and diameter of the foam are shown in Table 2.
You'll also be interested in:
Examples of using Ratio
Show more
Gross enrolment ratio at secondary level percentage
Ratio of owned versus leased office space
See proper dilution ratio instructions on bottle
Examples of using Expansion
Show more
Expansion or contraction of oven during heating cycle
Sounds of metal expansion and contraction are normal
Expansion tank required if a backflow preventer is installed
