Examples of 'exposed metal' in a sentence
Meaning of "exposed metal"
exposed metal: This phrase typically refers to metal surfaces or materials that are uncovered, unprotected, or not shielded, making them susceptible to corrosion, damage, or other external influences
How to use "exposed metal" in a sentence
Basic
Advanced
exposed metal
Never touch any exposed metal parts on.
All exposed metal parts are insulated.
Occasional spots of exposed metal on the rim.
No exposed metal for ice and snow buildup prevention.
Repair and paint damaged or exposed metal.
Do not touch exposed metal objects which might.
Do not contact moving parts or any exposed metal surface.
Cover all exposed metal surfaces.
Test the unit by holding it adjacent to an exposed metal object.
Check for exposed metal surfaces and surface rust.
Corrosion generally involves the degradation of an exposed metal surface.
Use care when touching exposed metal surfaces of compressor.
Inspect the leads for damaged insulation or exposed metal.
Exposed metal quickly rusts and can lead to major repairs.
Increase corrosion of exposed metal.
See also
Paint exposed metal or apply a light coat of rust preventative oil.
Serious injury could occur from touching exposed metal parts.
The exposed metal provides a conductive surface on the carrier material.
Inspect the test leads for damages insulation or exposed metal.
Exposed metal may be removed by wet chemical or dry plasma etch.
This would act to prevent heat loss from the exposed metal.
Lubricate all exposed metal with a light coating of oil to prevent corrosion.
Make sure that no speaker leads are shorting to exposed metal on the vehicle chassis.
Exposed metal that gets in contact with water will get rusty.
The new part has components of exposed metal and glass as elements of design.
Acid soot is unsightly and corrosive to the environment and to exposed metal surfaces.
Never touch any exposed metal parts on compressor during or immediately after operation.
The plate is then completely submerged in a solution that eats away at the exposed metal.
Exposed metal surfaces may be made live if the tool drills into electrical wiring.
Store in a dry area and coat exposed metal with light oil when not in use.
Touching exposed metal such as the compressor head or aftercooler can result in serious burns.
Touch up scrapes with spray paint and lubricate exposed metal to prevent rust and corrosion.
At this point the exposed metal substrate is etched through to the underlying polymer layer.
Inspect test leads and probes for damaged insulation or exposed metal before using the instrument.
All exposed metal parts are isolated from the internal metal motor components with protecting.
A blades policy that favors Slice safety blades over dangerous exposed metal blades.
All exposed metal parts are isolated from the internal metal motor components with protective insulation.
Prevents accumulation of snow and ice - no exposed metal components.
The exposed metal parts on the tool and accessory may become extremly hot during operation.
In this way, the wrist has no exposed metal parts.
Corrosion of exposed metal surfaces will start, if they are not protected.
Inspection of the connector look for cracks, breaks or exposed metal.
Be careful not to touch any exposed metal portions of the device, or any.
Prevents accumulation of snow and ice - due to removal of exposed metal components.
Then, even if the exposed metal surface is small in área, galling occurs easily.
If the zinc coating is damaged, the exposed metal can rust.
Touching exposed metal ( muffler and other engine parts ) can result in serious burns.
Additionally, any wear of the very thin layer leaves exposed metal.
Over time, the buildup of picrates on exposed metal surfaces can constitute a explosion hazard.
Inspect test leads, connectors, and probes for damaged insulation or exposed metal.
You'll also be interested in:
Examples of using Exposed
Show more
Only exposed surfaces should require cleaning
A place which is not exposed to a strong wind
Exposed piping beneath counters and sinks
Examples of using Metal
Show more
But there is metal in the electrolyte regulators
It sounds like a wheelchair going down a metal staircase
Plastic or metal foil vent is not recommended
