Examples of 'extrusion temperature' in a sentence
Meaning of "extrusion temperature"
This phrase relates to the specific temperature at which a material is heated during the process of extrusion. Extrusion is a manufacturing method used to create objects with a fixed cross-sectional profile. For example, 'The extrusion temperature of the plastic is crucial in determining its properties.' It denotes the importance of temperature control during the extrusion process
How to use "extrusion temperature" in a sentence
Basic
Advanced
extrusion temperature
The viscosity is matched to the extrusion temperature.
Upper and lower extrusion temperature limits are as follows.
The analysis temperatures are typical values of extrusion temperature.
The extrusion temperature profile was the same as indicated above.
These results indicate that the extrusion temperature should be minimized.
The extrusion temperature depends on the nature of the resins being extruded.
Normally a greater expansion degree corresponds to an increase in the extrusion temperature.
The extrusion temperature.
In addition no polyolefin degradation occurs thanks to the low extrusion temperature used.
Maximum extrusion temperature.
The active ingredient should be chemically stable in the extrusion temperature range.
The extrusion temperature is selected as a function of the thermoplastic polymer used.
Of course melt fracture is also dependent on extrusion temperature and flow rate.
The extrusion temperature window was widened significantly with no necking phenomena observed.
This flexibility decreases at the higher end of the extrusion temperature range.
See also
The extrusion temperature is below the melting point of the active substance.
The melt strength is determined at the chosen extrusion temperature for the compositions.
The optimum extrusion temperature of course depends on the rheological characteristics of the polymer.
A plasticiser is added to the mixture for the purpose of reducing the extrusion temperature.
The extrusion temperature and air temperature are selected in order to facilitate strand formation.
Figure 4 shows the effect of extrusion temperature on fiber drawability.
An extrusion temperature was varied depending on the content of Ca.
In a preferred embodiment, the high extrusion temperature is applied by barrel 3.
Extrusion temperature of thermoplastic polyurethane elastomer,.
Normally, a greater degree of expansion corresponds to an increase in the extrusion temperature.
This means that a higher extrusion temperature induces some transformations leading to improved compatibility.
Moreover, such increases in melt flow rate occurred at each extrusion temperature studied.
Normally, an increase in extrusion temperature corresponds to a higher expansion degree.
At a given spinning speed, crystallinity and birefringence increases with decrease in extrusion temperature.
Generally, an increase in extrusion temperature corresponds to a higher expansion degree.
This can be achieved by changing the extrusion velocity and / or the extrusion temperature.
Normally, increasing the extrusion temperature results in a greater expansion degree.
Extruding over the cladding, a manufacturing jacket consisting essentially of a low extrusion temperature polymer ;.
Usually, an increase in the extrusion temperature corresponds to a higher degree of expansion.
This can be accomplished by means of changing the extrusion velocity and / or the extrusion temperature.
Or in the alternative, the extrusion temperature can be reduced, thereby saving energy.
Extrusion temperature of each resin,.
The cross-head die is at an extrusion temperature sufficient to melt the thermoplastic resin.
Additionally, the donor polymer 23 may have a melt temperature at or below the extrusion temperature.
Reducing the extrusion temperature increases the half-life temperature of the peroxide.
Generally, the temperature is significantly less than the extrusion temperature of the fluorinated plastic.
The extrusion temperature is preferably above the liposome 's transient phase temperature to enable size reduction.
The melt / liquefaction temperature and particularly the extrusion temperature influence the strand denier and orientation.
The extrusion temperature is listed in Table 1 below.
When the group GP is thermopolymerizable, the extrusion temperature is lower than the polymerization temperature.
The extrusion temperature profile was set to that shown in below Table 2.
The molten / liquefied material is extruded under pressure ( at an extrusion temperature and pressure ) through orifices.
The extrusion temperature may be at about room temperature to about 85°F.
The screw extruder was cooled such that the extrusion temperature was -12 °C.
For the same reason, the extrusion temperature should be kept as low as practically possible.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Extrusion
Show more
This prevents extrusion of the anterior teeth
Extrusion and blow moulding of plastic materials
Extracting the product of extrusion as a continuous wire
