Examples of 'face of the plate' in a sentence
Meaning of "face of the plate"
The face of the plate refers to the visible side or surface of a plate
How to use "face of the plate" in a sentence
Basic
Advanced
face of the plate
The upper face of the plate is preferably flat.
A series of perforations are formed along the proximal face of the plate.
Upper face of the plate.
The emitter is mounted in a stationary manner on the upper face of the plate.
Bearing face of the plate.
The nut bears directly against the top face of the plate.
In the second stage, the face of the plate is rendered integral with a stiffener.
The heatsink can then be arranged against the other face of the plate.
The first face of the plate has ribs forming parallel exchange channel walls ; and.
Advantageously the open loop is bonded to one face of the plate by an adhesive.
Here each face of the plate has two adhesive areas 37.
The coating is situated on the principal face of the plate facing the source.
The upper face of the plate 10 has a substantially rectangular shape.
Even spreading is important to achieve uniform conductivity across the face of the plate.
FIG . 4 is a view of the back face of the plate bearing the mirror ;.
See also
However this involves important energy losses by reflection on the other face of the plate.
The face of the plate A that had already been used is indicated by hatching 24.
Possible surface defects must be ground away from the tension side face of the plate.
The arm 14 is fixed to a lower face of the plate 54 without any degree of freedom.
The lower joint J is situated near the lower face of the plate.
The hub bears against the upper face of the plate 53 by means of a shoulder 54a.
The lower joint J is located close to the lower face of the plate.
The rear face of the plate 33 is turned towards the front face of the member 32.
Instead, we want it to reference the outer face of the plate.
There is added against the lower face of the plate 2 a piece 8 FIG.
Rings 85 integral with the plate 36 extend outwardly from the distally directed face of the plate.
Waves were applied upon the anterior face of the plate Figure 1.
A leak-tight cavity 15 is thus formed in front of the smooth radiating face of the plate 1.
According to one embodiment of the invention, just one face of the plate comprises ribs.
An impermeable membrane 13 is associated with the lower face of the plate 4.
Primary read-out radiation may be incident on one major face of the plate or substrate.
The cholesteric filter CF may be on the plane face of the plate P6.
The cholesteric filter CF is on the plane face of the plate P6.
The spacing element can comprise a boss 27 formed on a face of the plate 6.
The disk is then loaded onto the upper face of the plate 10.
A connecting element consisting of a hook 55 is mounted on the outer face of the plate 52.
The ribs 4 here extend as a projection on just one face of the plate 2.
The rollers, not depicted, roll along against the face of the plate blank.
The beam passes through the prism 21 and reaches the internal face of the plate 2.
Instead, posts extend from the proximal face of the plate 36.
The spacer device 12 is carried by the left side face of the plate 16.
The perforation 77 does not open into the other face of the plate 76.
These pins are suspended by their heads 82 at the upper face of the plate 63.
This insert ring 30 advantageously includes a collar 31 on the end face of the plate 4.
All the perforations 14 open onto a front face and onto a back face of the plate 12.
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using Face
Show more
Was not ready to face my fickle public yet
To face you and to tell you that
All you had to face was how to be free
