Examples of 'fan speed setting' in a sentence
Meaning of "fan speed setting"
fan speed setting - This phrase refers to the control over the rate at which a fan operates, usually used in the context of adjusting the speed of a fan
How to use "fan speed setting" in a sentence
Basic
Advanced
fan speed setting
Ensure unit fan speed setting is selected.
Select between manual or automatic fan speed setting.
The fan speed setting is selected manually.
Shows current fan speed setting.
Fan speed setting appears here.
Adjust to suitable fan speed setting or use auto program.
Indoor fan stops occasionally during automatic fan speed setting.
Check if the fan speed setting is set to low speed.
The air dehumidifier has a high and a low fan speed setting.
Check the fan speed setting on your user interface.
The audible signal may be a tone signal whose pitch depends on the fan speed setting.
Check the fan speed setting on your remote controller.
Fan speed High Previous fan speed setting.
The manual fan speed setting will appear on the left side of the display.
If cooking performance is affected, change to a lower fan speed setting.
See also
Confirm fan speed setting.
Fan speed setting during Emergency Heater operation.
Turn the control knob to a fan speed setting to turn on the unit.
The fan speed setting is indicated by the illuminated ring around the fan symbol.
When excessive condensation exists, a lower fan speed setting is recommended.
Fan speed Fan speed setting appears here.
Cooling / heating capacity reduced during the lowest fan speed setting.
The fan speed setting is indicated by LED ring around the fan icon.
Select the mode, temperature and fan speed setting as desired.
The fan speed setting is fixed to AUTO and the AUTO is displayed.
Temperature than usual, and the fan speed is set to the highest fan speed setting.
Select the mode, temperature, fan speed setting and PLASMACLUSTER operation as desired.
In QUIET Mode, the fan rotates at a slower speed than the fan speed setting.
The fan speed setting can be changed to 2 or 3 if necessary.
Cura 3D offers a way to solve the excessive cooling problem via the Fan Speed setting.
Automatic fan speed setting Fig . 6.
You'll also be interested in:
Examples of using Fan
Show more
Big fan of you and your otters
We do not need to fan that flame today
Check fan blade screws for tightness
Examples of using Setting
Show more
I am setting the bar low so we are not disappointed
Adjust the volume setting to an audible level
Setting the running date and time
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
