Examples of 'fastener can' in a sentence
Meaning of "fastener can"
fastener can ~ a container or storage unit for fasteners, such as screws, nails, or bolts, used to keep them organized and easily accessible
How to use "fastener can" in a sentence
Basic
Advanced
fastener can
The fastener can be made to operate without it.
The toolmust be pressed against a firm surface before a fastener can be released.
The fastener can be a hexagonal bolt or nut.
Knowing accurately the location of the fastener can reduce errors in these calculations.
The fastener can ricochet causing personal injury.
The trigger must be released to reset the tool before another fastener can be driven.
The fastener can then be dismantled.
Just like the large plane face the fastener can thus convey strong emotions.
This fastener can be tightened using a mechanical wrench.
Of course, any suitable fastener can be utilized.
One fastener can be removed to be installed.
Of course, any suitable type of fastener can be used.
In this way a fastener can be for example tightened.
Accordingly a durable and high-quality surface fastener can be obtained.
And the fastener can be clamped.
See also
Do not drive a fastener on top of a previously nailed fastener, or the fastener can ricochet.
The fastener can comprise or be made of a bioabsorbable or biodegradable material.
In alternative forms, the bone fastener can be adhesively secured to the bone plate.
The fastener can be locked by means of a pushbutton mechanism acting in a transverse direction.
If tightening is continued, the fastener can be twisted off or its threads ripped out.
The fastener can include an elongated portion with a tip end.
Further, thick thick surface fastener can be produced with very simple means.
The fastener can be removed without damaging the roofing.
The fasteners 35 shown are wingnut fasteners but any suitable fastener can be used.
Such a fastener can be arranged in a lifter available at a given time.
The molded perimeter gasket, segmented fastener can be made in any suitable way.
The fastener can have a body that is substantially planar.
Softness is preferred such that the fastener can conform to the contours of a wearer 's body.
The fastener can then be fired into the target tissue.
If excessive force is required, stop and determine why the fastener can not be inserted.
The body of the fastener can be made of spring steel.
The fastener can instead be comprised of components separately manufactured and then assembled together.
The preferred use of the pivot fastener can simplify manufacturing of the coupling 10.
The fastener can also have an optional head at the end opposite tip end.
A circlip, star washer or other self-gripping female fastener can be secured to the shank.
This molded surface fastener can be continuously manufactured in the following manner.
As a result, opening / closing of the slide fastener can be achieved stably.
With this shank the fastener can be fixedly retained in a hole of a support sheet.
Thus, a strong, good-feeling surface fastener can be obtained.
The fastener can be fabricated with a single machining operation aside from thread tapping.
The construction of the quick-release fastener can be different from what has been described above.
The fastener can also be bent through any combination of the three modes discussed above.
Consequently, the sliding operation of the slide fastener can be carried out flexibly and lightly.
More than one fastener can be utilized to prevent this relative angular motion as well.
NOTE, Over driving or over powering a fastener can cause a safety hazard.
The fastener can then be cut and the door folded back into its normal position.
In an alternative embodiment, the fastener can comprise an array 305 of hook shaped elements.
The fastener can have a cavity extending longitudinally from the distal end for receiving a manipulation device.
In addition, a clamp fastener or band fastener can also be used instead of ring fastener 101.
Such a fastener can be opened and closed by hand, or with an appropriate device.
