Examples of 'fastening bolt' in a sentence
Meaning of "fastening bolt"
fastening bolt: Refers to a type of bolt that is used to securely join two or more objects together by fastening them tightly
How to use "fastening bolt" in a sentence
Basic
Advanced
fastening bolt
Fastening bolt for rebating depth stop.
Tighten the plastic nut of the fastening bolt turning clockwise.
Fastening bolt for parallel guide.
Driver blade not seated correctly behind the fastening bolt.
The fastening bolt and spring can suddenly come loose.
Secure the bending shoe with the fastening bolt into the appropriate housing.
The fastening bolt also achieves a better fastening and positioning effect after the drilling operation.
Thus a counterweight may be slipped onto a fastening bolt between the flange and the clamping nut.
The propellers are equipped with hubcap, which is normally covering the propeller fastening bolt.
Loosen the fastening bolt under the seat mounting plate.
When replacing the the blade, replace the fastening bolt also.
Retraction of a fastening bolt of the rear module ;.
Fastening bolt for parallel and beveling guide 21.
Indicated at 48 in the drawing is a fastening bolt for the mount flange.
Retraction of a fastening bolt of the front module together with release of a wide-sail parachute ; and.
See also
Mount the parallel guide 33 to the machine using the fastening bolt 8.
Chain box fastening bolt with self-locking nut.
The supporting arm 4 is fastened to the support bracket 3 by means of a fastening bolt 6.
V pulley fastening bolt loosened Retighten / replace.
The sensor carrier is mounted on a fastening bolt 757.
The fastening bolt 56 extends through the rotor frame.
Upper and lower parts of clip 14 are fastened by clip fastening bolt 17.
Fastening bolt comprising,.
The lower portion of the screw 4 and the sleeve 10 ends by a fastening bolt 18.
A not-shown fastening bolt can be screwed to the nut 94 from the right side.
Depending on the application, mount the rebating depth stop 24 with fastening bolt 23 to the machine.
Loosen the needle fastening bolt ( 12 ) and tighten it again after inserting the new needle.
Mount the parallel guide 17 or beveling guide 21 to the machine using the corresponding fastening bolt 20.
When fastening bolt M8 or smaller, carefully adjust.
The quick fastener 1 consists of a fastening bolt 10 having a fastening thread 12 with a first spiral direction.
The second fastening bolt 62 includes a second head section 66.
Only lightly tighten the fastening bolt ( 14 ), as you will still have to tension the saw.
The third fastening bolt includes a third head section 67 which is shown in Fig . 6.
You'll also be interested in:
Examples of using Bolt
Show more
Remove the bolt with a socket wrench
Bolt or clamp the saw to its support
Stiffener bracket bolt must be kept tightened
Examples of using Fastening
Show more
Fastening elements for fastening fixing nets
Loosen screws for fastening the appliance
The fastening torque is affected by a wide variety of
