Examples of 'fe content' in a sentence
Meaning of "fe content"
fe content: This phrase is vague and could potentially refer to 'iron content,' 'female content,' or something else entirely without more context
How to use "fe content" in a sentence
Basic
Advanced
fe content
Fe content controls the amount secondary phase particles which promote the formation of short chips.
The benchmark is based on this level of Fe content.
The Fe content in such a nigrosine can be determined by atomic absorptiometry.
Selective stoping of low Fe content iron ore.
With a high Fe content among other things the corrosion resistance decreases.
If the Ni content is small, the Fe content relatively becomes large.
However, the Fe content in general decreased over time which was unexpected.
An aluminum hydroxide gel particle having a Fe content of 1 to 10 ppm.
The Fe content of all these powders is determined, see the table below.
Preferably, said nigrosine dye comprises a Fe content of not more than 1 % by weight.
The Fe content is known to have a significant effect on minimum crack-free bending radius.
According to an even more preferential embodiment, the Fe content is at least 0,3 %.
The Fe content of Fe-containing precipitates in the steel decreases when alloying elements are added.
All samples were analyzed for Fe content by Inductively-Coupled Plasma Spectrometry ( ICP ).
Fe content that is not less than 2 ppm and not more than 8 ppm ;.
See also
The still further preferable lower limit of the Fe content is 2.5 %.
The Fe content of the alloyed hot-dip galvanized layer is preferably 7 % or more.
The first-layer weld metal has a chemical composition with an Fe content ranging from 10 to 40 %.
If the Fe content is lower than 30 atomic %, the corrosion resistance can not be achieved sufficiently.
EXPERIMENTAL OPERATION Catalyst Formulation - The catalyst was prepared with a target Fe content of 500 mg / kg.
When Fe content is more than 15 %, the oxidation resistance and the microstructural stability may decrease.
In addition, the T. Fe content of the metallic iron is in excess of 90 % by weight.
The Fe content of the iron powder was about 97 % by weight.
The Fe content of the iron powder is at least 90 % by weight.
If the Fe content is higher than 80 atomic %, it is difficult to form a metallic glass.
However, if the Fe content exceeds 15 %, the oxidation resistance and structural stability do deteriorate.
You'll also be interested in:
Examples of using Content
Show more
On the product content and environmental release
Content management interfaces for web systems
Adjusts style and content when necessary
Examples of using Fe
Show more
That s how human fe and ts h story are carr ed on
And you can even lose your fe
Exh aus t m icro filte r re fe re nce num b e r
