Examples of 'feed dog' in a sentence
Meaning of "feed dog"
The action of providing food to a domesticated canine, typically used in the context of caring for a pet dog
Show more definitions
- On a sewing machine, the toothed mechanism that uses a forward, down, back, and up motion against the presser foot to advance the fabric through the machine evenly.
How to use "feed dog" in a sentence
Basic
Advanced
feed dog
Never feed dog food to your cat.
Lint and dust accumulated around feed dog.
The feed dog is packed with lint.
Clean the hook and feed dog as described.
The feed dog was not raised after being lowered.
Link stuck on the feed dog.
Do not feed dog food to your sister.
Lint stuck on the feed dog.
Raise the feed dog for ordinary sewing.
Firmly tighten the set screws u in the feed dog.
Do not move feed dog lever during sewing.
Feed dog was lowered during sewing.
Clean the feed dog with the brush.
Feed dog at nights.
Tilt the front of the feed dog down slightly.
See also
The feed dog should be in up position for normal sewing.
Temporarily install the feed dog i with the two screws.
The feed dog must be always up for normal sewing.
Clean the reverse side of feed dog with a small brush.
The feed dog should be in the up position for regular sewing.
Clean the area between the feed dog teeth and in the hook.
The feed dog and presser foot work on one side only.
Rotate handwheel until the lower feed dog is below the throat plate.
Drop the feed dog so the machine will not feed the fabric.
Push the drop feed lever to the right to lower the feed dog.
Clean feed dog with brush.
A means for feeding the wire axially is represented by a reciprocating feed dog mechanism.
Many people feed dog food because it is cheaper.
The feed travel of the upper and the lower feed dog should be synchronous.
Locate the feed dog lever on the front of the free arm.
Brush off all dust and lint on feed dog with a cleaning brush.
You may use a vacuum cleaner to clean the upper knife area or feed dog.
The height of the feed dog q will change after the angle.
Remove the needle plate and bobbin case and clean the hook race and feed dog.
To feed dog.
Remove the needle and rotate handwheel until the feed dog is below the throat plate.
Then clean up the feed dog and the hook components using a cleaning brush.
After sewing is finished, raise the feed dog.
This will cover the feed dog and the stitch length will be disabled.
Remove the screw q, and then remove the feed dog.
Clean the catch teeth of the feed dog and the outside of the bobbin.
If the feed dog height requires adjustment, loosen the screw.
Brush out dust and cotton flock from feed dog and replace needle plate.
When the feed dog 0 is at its highest position above.
Are the heights of the feed dog appropriate?
Shift the drop-feed lever to the right to lower the feed dog.
Put it on just after you feed dog and take it off and give treats.
With a brush, clean out dust and lint clogging the feed dog teeth.
You will see the feed dog control when you remove the extension table.
Turn off the power switch and / or unplug the machine before cleaning the feed dog.
