Examples of 'feed end' in a sentence
Meaning of "feed end"
feed end - The end of a device or system where information or resources are input
How to use "feed end" in a sentence
Basic
Advanced
feed end
Pesticides from animal feed end up in meat.
Feed end of drain hose into one end of form.
Each spiral arm has a feed end and a termination end.
The feed end of the housing has defined therein at least three feed channels.
This point can be the feed end of the low pressure bed.
Continuing evacuation of the VSA bed from the feed end.
The bed has an input or feed end and an output or product end.
A fusión casting process typically uses a mold with a feed end and an exit end.
This blend was fed into the feed end of a laboratory single screw extruder.
A second layer of NaX can also be incorporated at the feed end of the adsorber.
No gas is passed from the feed end of the adsorbent bed during this step.
Metal flush trimmer should be set at the Feed End.
The spacing is narrower at the feed end and wider at the discharge end.
For regeneration, the beds were simply allowed to depressurize from the feed end.
Continuing evacuation of the VSA bed from the feed end using the second vacuum pump.
See also
The discharge pipes 12 are correspondingly preferably directed obliquely downwards towards the feed end.
The conveyor transfer loose material from the feed end to the discharge end.
Feed end of cable into clamp hole and firmly tighten screw Figure 10.
Dispersion is fed into the settler at the feed end of the settler.
During this time, the feed end evacuation blowers are unloaded.
In a lime manufacturing process, coarse limestone is fed into the feed end of the kiln.
Evacuating gas from the feed end of the first adsorbent bed ;.
Solids laden drilling mud is introduced from a tank 9 to a feed end 11 of basket 3.
The layer 13 nearest the feed end of the bed contains only alumina.
The settler 1 comprises a plurality of feed inlets 5 at the feed end 2 of the settler 1.
The void at the feed end of adsorbent bed 14 is minimized by bed support structure 26.
At EMO with Osawa high feed end mills.
The feed end of the adsorbent bed operates over the pressure range 40 to 140 kPa.
Each stage in the bundle possesses a feed end and a non-permeate end.
Two natural gas burners 40 and two air lances 42 were located in the feed end.
Alkali bypass, A duct located between the feed end of the kiln and the preheater tower.
The feed end 6 and rear end 7, bottom 8 and upper edge 9 of the tank are shown.
The underflow is then directed back on to a lower, feed end of a primary screen deck.
He donate part of his salary to feed end government housing plan, called “ Together ”.
FIG . 9 is a section through A-A at the feed end.
When feeding dispersion to the feed end 2, the process is as follows.
This radial bed design of vessel 10 minimizes the feed end and product end voids.
The drawing drum 10 may also be placed at the feed end F of the conveyor.
The separation process begins at the in feed end 18 of the screen 12.
