Examples of 'fiber diameters' in a sentence
Meaning of "fiber diameters"
fiber diameters ~ the measurement of the width of fibers, often used in textiles or materials science
How to use "fiber diameters" in a sentence
Basic
Advanced
fiber diameters
Fiber diameters useful are usually expressed in microns.
A wide range of fiber diameters are achievable.
Fiber diameters can be varied and controlled.
It is understood that also significantly different fiber diameters are applicable.
Fiber diameters are not disclosed.
It may be desirable to produce a single layer nonwoven with varying fiber diameters.
Interchangeability of fiber diameters for different spot sizes for any type of welding.
These indentations have different sizes and therefore fit different fiber diameters.
Frequencies for the fiber diameters of interest remain in the data after filtering.
The electrospinning of collagen fibers exhibited a concentration dependence on the final fiber diameters produced.
Fibers having different fiber diameters and deniers can be used in the present invention.
Thus, the thickness is of the order of magnitude of some fiber diameters.
Fiber diameters were determined with both optical microscopy and laser diffraction before fracture.
The above examples indicate the average fiber diameters that are commonly used.
Said fiber diameters are measured by video-microscopy or scanning electron microscopy.
See also
They typically have a wider range of lengths and fiber diameters than chopped strand fibers.
The actual fiber diameters were calculated, based on the calibration data, and averaged.
Alternatively, blends of fiber diameters can be used.
Also, if desired, the same polymer can be used to produce different fiber diameters.
As noted above, fiber diameters should be as small as possible.
Mixtures of fibers of different lengths and / or fiber diameters can be used as is known.
Generally, decreasing fiber diameters can improve softness of nonwovens and other substrates.
Typical meltblown fibers are known to consist of fiber diameters less than 10 microns.
Generally, smaller fiber diameters will result in softer nonwoven products.
In some embodiments, the fine fibers may have fiber diameters of 1 micron or less.
The histogram of the fiber diameters is very narrow, and does not have a unique maximum.
They can be easily fabricated into monofilament, yarn or staple with varying fiber diameters.
Further, blending various fiber diameters can result in enhanced properties.
Example 15 yielded extremely small average diameter fibers of a very narrow range of fiber diameters.
The fiber diameters can range from sub-micron fiber diameters up to microfiber diameters.
Preferably, fibrous carbon material different in both fiber diameters and fiber lengths are used.
Fiber diameters were measured and are shown in Table 1 for the various fiber spinning conditions.
Figure 3 is an SEM image of such a body showing various fiber diameters at higher magnification.
Typical fiber diameters range from 2 to 8 micron.
Electronic images taken at 750X magnification were used to measure fiber diameters.
Typical fiber diameters range from less than 1 micron to about 6 micron.
The panel of claim 1 wherein the fiber diameters do not exceed 5 microns.
While other fiber diameters may be used, it has been found that 200 microns is satisfactory.
For glass fiber reinforced composites typical glass fiber diameters are 8 - 20 µm.
For some applications, fiber diameters of less than about 10 micrometers are desired.
Graphs of total fiber numbers per section and a percentage of fiber diameters were plotted ( Figures 5-10 ).
Typically, the larger fiber diameters will be just above one micron to about 10 microns.
Fiber diameters varied between about 9-14 µm at optimum running conditions.
Such processes can produce fiber diameters even lower than 0.2 dTex.
Fiber diameters in the range from 1 to 1000 micrometers are generally preferred.
Diamond-coated graphite fibers with fiber diameters of from 3 to 15 µm are preferred.
The range of fiber diameters observed was from about 25 microns to about 200 microns.
The outer sock preferably has even larger fiber diameters ( coarser ) than the polyester batting 190.
Thus, for carbon fibers with fiber diameters from 5 to 10 82 m, the powder should have submicronic granulometry.
You'll also be interested in:
Examples of using Fiber
Show more
He lays fiber optic cable for a living
I hate this man with every fiber of my being
Fiber optic and current loop connector
Examples of using Diameters
Show more
Wide choice of diameters and lengths available
Diameters not indicated may be supplied on request
Only use saw blade diameters corresponding
