Examples of 'fiber surface' in a sentence
Meaning of "fiber surface"
fiber surface - the outer layer or texture of a material made of fibers
How to use "fiber surface" in a sentence
Basic
Advanced
fiber surface
The fiber surface will then turn anionic again.
The deeper layers of cartilage are stiffened by perpendicular fiber surface.
Fiber surface fastener and method for finishing same.
Brushing effect is more improved as a friction on a fiber surface is lower.
The fiber surface is dry as moisture moves to the fiber core.
The materials may also be deposited on the fiber surface.
The minimum fiber surface área as used herein can be described as follows.
This will cause voids to form close the fiber surface.
Geometry of the fiber surface and application of a hydrophilic lubricant are very important.
This can be done by simply burnishing graphite onto the fiber surface.
A fiber surface finish is typically applied to all fibers to facilitate their processability.
The first mechanisms cited is effective by virtue of the quantity of fiber surface.
An analysis of the fiber surface permits to establish the origin of the new defects.
Hydrazine can work as a reducing agent even if attached covalently to fiber surface.
The hydrophobic fiber surface may impede the absorption performance of the absorbent structure.
See also
It is even more preferred that the fibers are substantially free of a fiber surface finish.
The art teaches many types of fiber surface finishes for use in various industries.
Also using this method bears the risk of damaging the fiber surface.
This reduced minimum fiber surface área is referred to as the pulp incremental surface área.
Fiber coarseness generally increases as fiber length and fiber surface área increase.
Fabrics with greater fiber surface área can also increase the effectiveness of the coating process.
The fiber images can be ranked by fiber length and by fiber surface área.
Column C lists fiber surface areas in units of square meters per gram.
The amorphous polyetherketoneketone preferably forms a relatively thin coating on the fiber surface.
Further, the fiber surface may be damaged.
The antistat composition of this invention is topically applied as a finish on the fiber surface.
Thus, the fiber surface corrugation is considerably limited.
Silicone is used in the composition of the invention to make the fiber surface hydrophobic.
However, typical fiber surface finishes are not universally desirable.
Here the surfactant appears to hold the hydrophilic silic acid at the fiber surface.
The effects of fiber surface composition on physical properties of (chemi)mechanical pulps.
The wetting agent is added to facilitate contact between the dispersion and the fiber surface.
Generally, this results in less fiber surface área in the downstream regions.
The polypropylene fiber spontaneously transported the aqueous Syltint Poly Red solution on the fiber surface.
Aramid fiber surface treatments and pretreatments have, generally, not been entirely satisfactory.
This fiber spontaneously transports the aqueous Syltint Poly Red solution along the fiber surface.
With this invention, the fiber surface may preferably have ups and downs.
The above fiber spontaneously transported the aqueous Syltint Poly Red solution along the fiber surface.
The diffusion rate at the fiber surface and, especially, in the interior of the fiber.
An alginate matrix was then applied to the amine-functionalized fiber surface as follows.
Then, fiber surface is modified by acetylation and silane before processing composite materials with polypropylene.
First, a seizing agent or the like sticking on the carbon fiber surface is removed.
With the chitosan coating, the cotton fiber surface became physiologically and biologically active.
This is achieved for example by utilization of CSH-seeds attached to the fiber surface.
Corona treatment typically oxidizes the fiber surface and / or adds polarity to the fiber surface.
Since these resins have an aromatic ring, they interact strongly with a carbon fiber surface.
Accordingly, crosslinking of fiber surface only can not improve the wet heat resistance applicable to FRC.
Evidences of fiber / matrix interface improvement and crystallites nucleation on the fiber surface were also identified.
Total fiber surface área of the five layers was 4.07 square meters.
Traditionally, the kinetics have been greatly limited by the available fiber surface morphology and geometry.
You'll also be interested in:
Examples of using Fiber
Show more
He lays fiber optic cable for a living
I hate this man with every fiber of my being
Fiber optic and current loop connector
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
