Examples of 'fiber volume' in a sentence
Meaning of "fiber volume"
Fiber volume: The proportion of space within a material that is occupied by fibers
How to use "fiber volume" in a sentence
Basic
Advanced
fiber volume
Fiber volume and fiber content varies.
In both techniques increases by the pressure of the fiber volume fraction.
Achieving a high fiber volume fraction requires compaction of the preform.
This applies in particular in the case of a reinforcement with a large fiber volume.
Achieving a high fiber volume fraction requires compaction against the forming surface.
Compaction is achieved by pressing the preform to achieve its finished fiber volume fraction.
Fiber Volume Fraction The fiber volume fraction was measured by a standard metallographic technique.
Movement decreases preform compaction and ultimately produces lower fiber volume composites.
Determining the fiber volume ratio and / or the local porosity ratio.
The composites can be used in aerospace applications when suitable fiber volume fractions are achieved.
Such fiber volume contents are lower than the contents usually applied in fiber-reinforced polymers.
The infused composite will have a lower fiber volume fraction than desired.
The composite fiber volume fraction is calculated using the following equation, EPMATHMARKEREP where,.
The finished thickness of a given preform is directly related to its finished fiber volume fraction.
Both panels were constructed with the same fiber volume fraction and the same matrix resin.
See also
Thus on balance, this adhesive layer showed a reduced fiber volume.
It is now necessary to arrive at the fiber volume fraction in the composite Vf.
However, entanglement of fibers increases to fail to obtain one having a high fiber volume content.
The fiber volume ratio of in the woven texture as indicated above is around 30 %.
These values are sufficiently high as expected from the measured fiber volume fraction Vf.
Precise fiber volume fraction -- The fiber comes pre-impregnated in frozen state to the tube manufacturer.
These results showed that the tensile modulus increased with an increasing fiber volume fraction Vf.
The fiber volume fraction in the composite material was 33 %.
Typically, manufacturers attempt to achieve this by increasing the fiber volume fraction in the parts.
We desire fiber volume fractions in excess of 50 %.
However, the flowability decreases undesirably as the fiber volume fraction Vf increases largely.
There are several methods for compacting the preform to a state of 55 % or greater fiber volume.
The standard prepreg has a nominal fiber volume fraction of about 58 %.
Compressive values are normalized to 64 % fiber volume.
Thus, flowability can be maintained only when the fiber volume content Vf is below about 40 %.
The above-described resin sheet was adjusted to have a carbon fiber volume content of 30 %.
Fabric according to claim 1, having a fiber volume fraction of not less than 57 %.
The fibers 32a have a continuous, aligned fiber orientation 34 enabling high fiber volume packing efficiency.
These results are reasonable for a material specified at 50 % E-glass fiber volume showing essentially liner behavior.
The accuracy of this method for determining the fiber volume fraction was believed to be + / - 2 %.
As a result, a high-quality molded product whose carbon fiber volume content was 56 % was obtained.
You'll also be interested in:
Examples of using Fiber
Show more
He lays fiber optic cable for a living
I hate this man with every fiber of my being
Fiber optic and current loop connector
Examples of using Volume
Show more
Check if the volume is set high enough
Volume will be increased only in receiver mode
Wine of a beautiful volume with a roasted final
