Examples of 'fill plug' in a sentence
Meaning of "fill plug"
fill plug: A term used in automotive maintenance to describe the act of replacing the plug used to seal a hole in the oil pan that allows for oil changes
How to use "fill plug" in a sentence
Basic
Advanced
fill plug
Replace oil fill plug or dipstick.
Remove the transmission fluid dipstick or fill plug.
Remove the oil fill plug from the.
Install and tighten the oil fill plug.
Reinstallthe top fill plug on the top right side.
Reinstall the oil fill plug.
Remove oil fill plug and oil level plug.
Replace the oil fill plug.
Reinstall the bottom fill plug on the bottom right side of the.
Check the fluid level by removing the fill plug.
Finally twist the fill plug carefully back again.
Check the oil level by removing oil fill plug.
Replace pump oil fill plug and tighten securely.
Identification on the genset of the lubricating oil fill plug.
Reinstall the top fill plug on the top right side.
See also
Clean the area around the oil fill plug.
Remove the bottom fill plug on the bottom left side of the.
I swear it appears that some of it is coming from the fill plug.
Reinstallthe bottom fill plug on the bottom right side of the doon.
Remove oil drain plug from engine and oil fill plug or dipstick.
Remove the oil fill plug and turn the pump upside.
Remove oil drain plug from engine and oil fill plug to drain oil.
Remove the top fill plug on the top left side of the door.
Install and tighten the fill plug securely.
Remove the top fill plug on the top left side of the doon.
Wipe up any oil that may have spilled and reinstall the oil fill plug.
Clean the area around the oil fill plug before removing it.
Remove oil fill plug and drain plug to drain oil as shown in figure.
Unscrew and remove the tank fill plug on top of the tank.
Remove fill plug and fill pump and suction piping through priming tee.
Remove oil drain plug from end of hose and oil fill plug to drain oil.
Remove the oil fill plug and fill the crankcase with recommended oil.
Remove oil drain cap from the drain hose and oil fill plug to drain.
Install oil fill plug and dipstick, tighten securely.
Oil should be level with bottom of fill plug as shown K.
If needed remove oil fill plug ( A ) and slowly add oil until it reaches the middle.
If the gear oil level is okay, securely replace the oil fill plug.
Replace dipstick / oil fill plug and tighten securely.
If leakage is detected, Check the fluid level by removing the fill plug.
An option is to have the rubber fill plug act as over-pressure protection.
Oil Fill Plug, Pull to remove oil fill plug prior to adding oil.
Drain the engine oil by unscrewing the oil fill plug ( 1 ) and using the syringe supplied.
Remove oil fill plug - Add until oil reaches “ MAX ” oil notch in oil fill plug.
The hash mark closest to the fill plug is the H ( igh ) mark.
Remove the oil fill plug from the crankcase Fig . 8.
The engine has a dipstick that is either part of the oil fill plug ( D ) or a.
If needed remove oil fill plug ( G ) and slowly add oil until it.
Figure 15, Removing the transmission fill plug.
Replace oil fill plug ( A ) and tighten securely.
Make sure the O-ring is in place on the oil fill plug Fig . 8.
