Examples of 'filler plug' in a sentence
Meaning of "filler plug"
filler plug: This phrase typically refers to a device or component used to seal a hole or gap in machinery, equipment, or plumbing systems to prevent leaks or maintain pressure
How to use "filler plug" in a sentence
Basic
Advanced
filler plug
Carefully open the filler plug cap.
Put filler plug back in place.
Replace and tighten the filler plug.
Replace filler plug finger tight.
I see what appears to be a small filler plug.
Unscrew the oil filler plug with the dipstick.
A threaded dipstick is built into the transmission filler plug.
Replace the filler plug and tighten it one turn.
Oil level oil filler plug.
Remove the filler plug from the side of the gearbox.
Insert the dipstick without tightening the oil filler plug.
Remove the filler plug from the tyre valve.
Cavities of pin inserts can only be filled with half a filler plug.
Tighten dipstick or oil filler plug firmly before starting engine.
Slightly press the bellows until some oil escapes from the filler plug.
See also
Tighten down the filler plug after changing its seal.
Fill to the correct level with the new oil and refit the filler plug.
Remove the filler plug and inspect the fluid level.
A resilient ball keeps upward pressure on the detent which is housed within the filler plug.
Screw the oil filler plug with the dipstick tight.
Fill to FULL mark on dipstick or overflowing at oil filler plug.
Remove the filler plug from the system back panel.
Consult section Oil and oil filter change to locate the filler plug.
Unscrew the oil filler plug and the oil drain plug.
With engine level, remove engine oil filler plug.
Tighten the filler plug with a wrench and reinstall the unit.
The present invention relates to an improved high-pressure pump with filler plug.
Screw off the Oil Filler plug and wipe off any oil on the dip stick.
Afterwards, carefully screw-in the filler plug again.
Some axles have a filler plug and drain plug ; some have only a filler.
If oil is required, add slowly . Tighten dipstick or oil filler plug firmly before starting engine.
Oil filler plug / oil dipstick.
Screw in breathing / oil filler plug.
Loosen the oil filler plug ( F ) and fill with oil to the under.
Every 50 hours of operation by removing the grease filler plug on.
Remove the filler plug and dipstick and fill with ISO VG46 hydraulic oil.
Depressurize the oil system by unscrewing the oil filler plug 3-Fig.
Remove the oil filler plug ( a ) and the drain plug ( b ) to drain the oil.
To refill automatic oiler, remove oil filler plug Figure 1.
Screw on the oil filler plug and check oil ( see illustration Y1 )!
Do not pour in too much oil . - Replace oil filler plug and retighten.
Re move filler plug ( A ) from transaxle.
M1A1 - the mine has a single filler plug on the top surface.
Refill with engine oil through the filler plug on the rocker arm cover Fig . 7.3.
Fill oil by removing oil filler plug on side of gearbox A, Fig 12.
