Examples of 'film capacitors' in a sentence
Meaning of "film capacitors"
Film capacitors are electronic components used to store and release electrical energy. They are made of thin plastic films as dielectric material and metalized electrodes. Film capacitors are widely used in various electronic devices and circuits due to their reliability and stability.
How to use "film capacitors" in a sentence
Basic
Advanced
film capacitors
Film capacitors are also called plastic film capacitors.
The wire could be sprayed on the surface of film capacitors.
Film capacitors are an appliance that uses a relatively high frequency.
The present invention concerns the fabrication of film capacitors.
Film capacitors would have much longer service lives.
Construction of plastic film capacitors.
Film capacitors and electrolytic capacitors have no significant voltage dependence.
Finally the best method to prevent the hazardous failures of metallized film capacitors is presented.
Power film capacitors.
The temperature and frequency dependencies of electrical parameters for polypropylene film capacitors are very low.
Film capacitors are not polarized and are suitable for handling an alternating voltage.
The following table identifies the most commonly used dielectric polymers for film capacitors.
Film capacitors have become much smaller since the beginning of the technology.
The dissipation factor of PP film capacitors is smaller than that of other film capacitors.
Most of the former PC capacitor applications have found satisfactory substitutes with PP film capacitors.
See also
Polycarbonate film capacitors are no longer manufactured because the dielectric material is no longer available.
Instead long-life film capacitors are used.
Metallized film capacitors are made of two metallized films with plastic film as the dielectric.
Because of these advantages, the use rate of film capacitors continues to rise.
But the manufacture of film capacitors does have a critical dependency on the materials supply chain.
Another technique to increase the surge current rating for film capacitors is a double-sided metallization.
The actual capacitance of film capacitors depends on the measuring frequency and the ambient temperature.
Therefore, the number of manufacturers of PTFE film capacitors is limited.
The market demand for film capacitors will further show a rapid growth trend.
The capacitors can be inexpensive 5 % mylar film capacitors.
Polypropylene film capacitors where possible and polyester film where values does not allow the previous.
Some old, large oil-filled paper or plastic film capacitors contain polychlorinated biphenyls PCBs.
Polyester film capacitors in series and low DF electrolytic capacitors in parallel.
Polycarbonate film of a thickness not exceeding 15 μm, for the manufacture of film capacitors 1.
Characteristics Film capacitors are widely used because of their superior characteristics.
The metallized film was incorporated into 0.18µF electrostatic film capacitors by winding and attaching leads.
PTFE film capacitors are used in applications that must withstand extremely high temperatures.
Main producers of PTFE film capacitors are located in the USA.
Film capacitors are suitable for a wide temperature range and are little limited by temperature ;.
Two main advantages of film capacitors are very low ESR and ESL values.
Film capacitors with PVDF are described for one very special application, in portable defibrillators.
On the other hand film capacitors are non-polarized.
Polycarbonate film of a thickness not exceeding 15 µm, for the manufacture of film capacitors [1].
In general, film capacitors are not polarized, so the two terminals are interchangeable.
We will expose the inductors, transformers, film capacitors and filters specifically dedicated to this application.
Metallized film capacitors manufacturers ' markets have been squeezed by ceramic capacitors and aluminum electrolytic capacitors.
How long the film capacitors stay,.
Polyphenylene sulfide film capacitors are well-suited for applications in frequency-determining circuits and for high-temperature applications.
KEMET announced two new series of power film capacitors that meet the requirements of AEC-Q200.
Class 1 PP film capacitors are able to handle higher current than stability Class 1 ceramic capacitors.
The highest surge-current rated film capacitors are film / foil capacitors with a metal foil construction.
Polypropylene film capacitors have a linear, negative temperature coefficient of capacitance of ± 2,5 % within their temperature range.
Low-cost metallized plastic film capacitors for general purpose applications are produced in this manner.
Therefore, PEN film capacitors are more suitable for high temperature applications and for SMD packaging.
Trouble-free by supporting fast film capacitors for transient filtering, these are the smallest disturbances.
You'll also be interested in:
Examples of using Film
Show more
The film has not started yet
We are finishing the film about that invention
Film can be applied without disconnecting pump
Examples of using Capacitors
Show more
Capacitors store electrical charges on circuit boards
Make sure that all capacitors are discharged
Capacitors can have different service lives
