Examples of 'film of oil' in a sentence
Meaning of "film of oil"
A film of oil refers to a thin layer or coating of oil that is spread out over the surface of another substance, typically liquids like water
How to use "film of oil" in a sentence
Basic
Advanced
film of oil
Apply a light film of oil to the tap.
The suit was covered in a thin film of oil.
Leave a light film of oil on finish.
Coat all surfaces liable to rust with a thin film of oil.
Spread a film of oil along the intended line of cut.
Coat sample with a thin film of oil with toweling.
Coat the gasket on the new filters with a film of oil.
There may also be a film of oil on the toilet water.
Coat areas that may rust with a light film of oil.
Apply a light film of oil on any areas that are susceptible to rust.
We all have a natural protective film of oil on our skin.
Spread a thin film of oil along the cutting line before sawing.
This is similar to the colors produced by a thin film of oil on water.
Apply a light film of oil to all the moving parts of the gun.
The oxidation is effected in the presence of catalysts and on a thin film of oil.
See also
Mingling results in coating a film of oil on the surface of each potato piece.
Friction between moving metal parts in the engine is minimised by a thin film of oil.
Spread a thin film of oil along the proposed cutting line before cutting.
Clean the shredder and cover all metal surfaces with a light film of oil.
All accessories are coated with a thin film of oil to protect them from corrosion.
A press belt encircles and slides over the pressure shoe on a lubricating film of oil.
A substantially continuous film of oil is maintained and replenished on each thrust bearing pad.
During manufacture, many parts are given a thin film of oil to protect them.
Spread a thin film of oil along the proposed cutting line before commencing to saw metal.
Slick The common term used to describe a film of oil on the water surface.
Here, a thin film of oil is sufficient and can be.
Inter-shaft bearing for multibody turbojet engines with damping by a film of oil.
Near the shore, a film of oil floating on the surface.
A film of oil is created, separating the bar to be machined from the guide component.
During production, a thin film of oil is applied to protect many components.
Remove deposits with a brush and apply a thin film of oil see Figure 9.
The film of oil will trap steam, and may cause a violent eruption.
Thus, mill actually " floats " on a film of oil between journal and bearing.
This film of oil is commonly known as a “ squeeze film ”.
You'll also be interested in:
Examples of using Film
Show more
The film has not started yet
We are finishing the film about that invention
Film can be applied without disconnecting pump
Examples of using Oil
Show more
Check oil level and fill if needed
Directions for observation with oil immersion
Use olive oil instead of grapeseed oil
