Examples of 'film samples' in a sentence
Meaning of "film samples"
Film samples refer to excerpts or portions of movies or films that are used for various purposes, such as promotional trailers, editing or post-production analysis, or showcasing an actor's or director's work. These samples are typically selected to represent the overall quality, style, or essence of a film to potential audiences, industry professionals, or investors
How to use "film samples" in a sentence
Basic
Advanced
film samples
Unprocessed samples are film samples tested as produced.
Ten film samples were thus made.
The lecture will be accompanied by intriguing film samples.
The above film samples were not irradiatively treated.
Lack of stability is indicated by a darkening of the film samples.
Two film samples were pressed together at elevated temperature.
Beginning to the end of the three film samples.
Film samples were made at a controlled rate and at a maximum rate.
Preparation of coated film samples.
The polymer film samples were prepared in the following manner.
The gel rating was observed visually from film samples.
Film samples are put in contact with some adhesive material.
The accurate thickness of the obtained film samples was measured.
The film samples were prepared and tested as described above.
The average thickness of the film samples was determined and recorded.
See also
Three film samples were used to determine the gauge variation.
Ferromagnetic resonance studies done on as deposited thin film samples are also discussed.
Film samples are collected at a controlled rate and at a maximum rate.
It consists of the characterization of gapn film samples with different nitrogen concentrations.
The seven film samples are immersed in two liters of extraction media.
The amount of extracted residue from the seven film samples is recorded in mg.
All the coated film samples show equivalent abrasion resistance.
Table VI presents the measured oxygen transmission rates for film samples prepared in this manner.
Several coated film samples were prepared with each coating solution.
The average puncture energy for five film samples is listed in Table II.
Processed film samples are coated with printing inks and transparent coatings.
These adhesive coated polypropylene film samples were then used for peel testing.
Clear film samples had a special sparkle also probably due to birefringence.
The compost was manually turned daily and film samples were checked for embrittlement.
The film samples were prepared from the polymers and tested as described above.
Great care was taken to keep the coated film samples from becoming contaminated.
Film samples that were not treated with the excimer laser were identically coated.
The researchers have found that the film samples did show significant piezoelectric properties.
The film samples were visually checked initially and periodically for signs of delamination.
Visual evaluation of the blown films Film samples have been put under a light microscope.
Film samples for testing in the static decay test are cut from this film.
The FAR test is conducted by comparing film samples to a standard with a given FAR rating.
The film samples obtained showed a good antifog property and mist preventive property.
Reinforcing this are the American Gangster film samples that can be heard throughout the album.
Processed film samples are films that are coated with screen printing inks and transparent coatings.
The results of testing the comparative film samples are shown in Tables VI and VII.
Film samples were produced on an Egan three layer extruder system.
Figure 9 shows shrinkage of the film samples in the machine direction.
The film samples were then reanalyzed with the FTIR as described above.
Mechanical tests carried out on film samples have given following results,.
Film Samples were then preconditioned in the environmental chamber to maintain moisture levels.
Table 2 shows the testing results obtainable from the film samples.
Each of the label film samples was then evaluated for image transfer quality.
These solutions were used to hand-coat test film samples by laminating two films.
Film samples are tested in a closed-volume permeation device.
You'll also be interested in:
Examples of using Film
Show more
The film has not started yet
We are finishing the film about that invention
Film can be applied without disconnecting pump
Examples of using Samples
Show more
I brought back samples of her root that
Samples should be related to the proposed project
Please take my samples back with you
