Examples of 'final annealing' in a sentence
Meaning of "final annealing"
Final annealing: Final annealing refers to the process of heating and then slowly cooling metal or glass to remove internal stresses and toughen it
How to use "final annealing" in a sentence
Basic
Advanced
final annealing
The final annealing conditions were set as follows.
Method for final annealing.
Aluminization after the first stage of the final annealing.
The final annealing process may be continuous annealing or box annealing.
This third coating is followed by a final annealing at a higher temperature.
A final annealing is applied to harden the resin pattern formed in this manner.
The conditions of the intermediate annealing are similar to those of the final annealing.
The final annealing has been executed either as a continuous annealing or as a bell annealing.
This diffusion is then complemented with the final annealing of the bipolar structure.
The final annealing time is selected to insure complete removal of the rolling lubricants.
The formation of these thin skinned membranes generally involved a final annealing treatment in hot water.
And a final annealing in two stages comprising,.
And by the fact that the second stage of the final annealing comprises,.
It includes a final annealing step for releasing stresses ; and.
The end of this annealing comprises a second stage, at this final annealing temperature.
See also
Subsequently, the final annealing was performed.
Temper rolling is carried out in a customary manner, whenever necessary, after final annealing.
Therefore, the final annealing process is a recrystallizing soft annealing step.
The formation of these dense-skinned membranes generally involved a final annealing treatment in hot water.
The characteristics after the final annealing are therefore, the definitive characteristics.
The final annealing in vacuum is performed consisting of a stress-relief, a partial recrystallization or a complete recrystallization.
In Al, small reductions prior to final annealing are required to produce the cube texture.
Final annealing by performing batch annealing of the steel sheet, obtained after method step b ; and.
The Kearns factors of the samples after final annealing are set out in Table 4.
If necessary, a final annealing step may be added to release the stresses due to calibration.
FIG . 5 a is a micrograph taken in polarized light of the reference sample after final annealing.
In the final annealing of the cold strip, a material having advantageous texture is formed.
A further 30 cycles were performed at the final annealing temperature.
Lower final annealing temperature should bring them to a level close to the properties of 8015 foil.
A method according to claim 11, including a final annealing step for releasing stresses.
Thus the final annealing step of step 4 of Example 1 is not done.
A process according to claim 1, wherein the first final annealing step comprises,.
The products underwent final annealing according to cycle B of Example 2.
FIG . 1 shows an example of the temperature profile of a final annealing.
The annealing ends with a stage at the final annealing temperature of the order of 600 ° C.
The final annealing temperature would then be 45°C.
This is also illustrated by the final annealing temperatures of the curves 52 and 53.
The aging treatment after hot-rolling or final annealing was continuted 100 hrs.
You'll also be interested in:
Examples of using Annealing
Show more
Spare parts for annealing furnace pressing
Annealing of flat glass and of container glass
The surface is flattened by annealing at high temperatures
Examples of using Final
Show more
Circulate final report to stakeholders in all modes
You are not skiing in the final competition
Recommend final acceptance to the project manager
