Examples of 'final diameter' in a sentence
Meaning of "final diameter"
final diameter: Final diameter refers to the last measurement of the width or thickness of a circular object, such as a pipe, tube, or ring, once it has been completed or is in its finished state
How to use "final diameter" in a sentence
Basic
Advanced
final diameter
Compute wheel position to achieve final diameter.
Expanded diameter means final diameter in an unconstrained expansion.
Adjust wheelfeed instructions to achieve final diameter.
Cut to final diameter.
The particles all were made to the same final diameter.
The final diameter of the membrane was between four and six mm.
At the smallest final diameter.
If no further drawing step is performed the intermediate diameter is the final diameter.
The present invention is wrapped at its final diameter to alleviate associated transverse strain.
The final reduction provides a composite wire with a final diameter.
This gives the jet its final diameter before contact with the material to be cut.
The wire can then be drawn down to the required final diameter.
The final diameter is less than the second diameter and greater than the third diameter.
The jacket is then rolled in a pilgrim step rolling mill to its final diameter.
Consequently, the final diameter of the logs will increase.
See also
The cold rolling is the stage where the thickness or obtain final diameter.
In this example the final diameter of the twisted multistrand is about 2 mm.
The steel rod is drawn in a number of consecutive steps until the required final diameter.
Figure 7 shows a catheter balloon at a final diameter with non-distensible regions.
Finally, the particles are optionally micronized to the desired final diameter.
A ceramic having a final diameter of 50 mm was obtained after the sintering and polishing steps.
A drawing step for obtaining the desired final diameter of the brassed wire.
Once the desired final diameter has been obtained the covering material can be removed e . g.
This characteristic is advantageous specifically for reels R whose final diameter is particularly high.
The final diameter varies according to the rat weight as shown in Table 1.
The resulting half-product is further drawn to final diameter filament.
The target having a final diameter of 50 mm was obtained after polishing.
The drawing speed is servo-controlled so as to obtain the desired final diameter.
Close dimensional tolerances are required as the final diameter reduction does not exceed approximately 1 %.
Subsequently, the fiber was progressively stretched at elevated temperatures to produce a final diameter of ca.
The final diameter of this preferred jacketed cartridge is about 7.5 mm.
The wire thus obtained is then work-hardened to achieve the final diameter required.
The final diameter of the particles was 1.8 microns.
Drawing said wire at said intermediate diameter d â‚‚ and work hardened state to a final diameter df.
This final reduction 25 provides the final diameter to the composite wire.
The holes 14 should each have a diameter that is greater than the desired final diameter.
The final diameter of the fibre was 470 microns.
The still molten fibers are simultaneously cooled by air, drawn to a final diameter and collected.
The final diameter of the steel / sisal rope is 13 mm.
Once released into the lumen of the intestine, the stent progressively resumes its final diameter.
The final diameter of the jacketed plastic tube is about 7.5 mm.
Large recoil necessitates over-expansion of the stent during implantation to achieve the desired final diameter.
The final diameter of the jacketed fuel element is about 7.5 mm.
The outer reinforcement cage is pre-curved to a relaxed ( unloaded ) diameter greater than its final diameter.
Control means 19 for controlling the final diameter of the resulting fiber 1 ; and.
FIG . 4 shows bale A which has reached its final diameter.
In the embodiment in question, the final diameter of the bumps 8 after mounting is 500 microns.
The resultant disk is dense and gas tight and has a final diameter of 3.12cm.
The wiredrawing then is continued to the final diameter of 0.20 mm.
The two electrode wires had the same final diameter of 0.25 mm.
You'll also be interested in:
Examples of using Diameter
Show more
A change in wire diameter results in changed parameters
Diameter of and pressure in the fire mains
The incoming hole diameter on auxiliary terminal
Examples of using Final
Show more
Circulate final report to stakeholders in all modes
You are not skiing in the final competition
Recommend final acceptance to the project manager
