Examples of 'final dry' in a sentence
Meaning of "final dry"
final dry: This phrase could refer to the last stage of a drying process, such as in laundry or painting. It could also indicate the completion or conclusion of a task that involves removing moisture or providing a finishing touch
How to use "final dry" in a sentence
Basic
Advanced
final dry
Total fat in final dry product.
The final dry blend is then suitable for compression.
The fractions are collected and lyophilized to obtain final dry peptide.
The final dry weight of the test sample was obtained after drying.
This freeze dried mass gives the final dry matter portion.
Therefore the final dry solids content was limited to this level in this test.
Apparent voluminal Final dry.
The paste is dried and the final dry cake is ground to form a flavoring powder.
Final dry leaves Things that are not.
This will allow an extended final dry time without incurring an increase in soda levels.
Final dry film thickness of the adhesive was 5 mils.
Varying the conditions may produce a final dry product with higher Methacholine concentrations.
The final dry blend is then suitable for compression by the methods described above.
The fractions are treated to replace counterion, collected and lyophilized to obtain final dry peptide.
The final dry blend is then suitable for compaction by the methods described herein.
See also
Subsequently demineralized whey powder was added to arrive at a final dry matter content of 18 %.
The final dry times are compared to minimum criteria set by HP.
Figure 1.0 shows the variation in moisutres with vacuum and final dry time.
The final dry powder non-volatiles content was ca.
This resulted in a final dry matter content of 30 %.
The final dry film thickness of the adhesives was 5 mils.
Apply 2 coats for a final dry coat of 4 mils.
The final dry polymer is prepared in the same way as Example 2.
Compositions are given in g / kg of final dry product, without moisture ( w / m ).
The final dry product was analyzed one more time using analytical RP-HPLC.
Mean c ompositions are given in g / kg of final dry product, without moisture ( w / m ).
The final dry film thickness is approximately 20 mil.
Their percentage, calculated relative to the final dry product, is less than 13 %.
The final dry coating weight amounted to about 15 wt % of the tablet core.
A third coat may be required to achieve a final dry mil thickness of about 10-15 mils.
The final dry weight extract of the mixture was 30 %.
The coatings had a final dry film thickness of about 20 µm.
The final dry polymer product had an inherent viscosity of 1.68.
The weight of the final dry powder was 1.1 kilograms.
The final dry product should preferably have a moisture content of 10 % or less, more preferably below 6 %.
The final dry time is 15 days i.e. you have significant time economy.
The final dry coating weight amounted to 20.4 wt % of the weight of the tablet core.
You'll also be interested in:
Examples of using Dry
Show more
Dehumidifier does not dry the air as it should
Let it dry completely before starting it up again
Dehumidifi er does not dry the air as it should
Examples of using Final
Show more
Circulate final report to stakeholders in all modes
You are not skiing in the final competition
Recommend final acceptance to the project manager
