Examples of 'final material' in a sentence
Meaning of "final material"
final material - This phrase usually denotes the ultimate or last substance, material, or resource used in a specific process or creation. It suggests that after various stages or iterations, a final material is selected and utilized to complete a particular object, project, or work
How to use "final material" in a sentence
Basic
Advanced
final material
The final material is a mixture of two stereoisomers.
Rapid prototyping or machining of parts in final material.
The final material ends up being idealised and fetishised.
It also facilitates the use of the final material.
Assembly of the final material of a production.
A complete characterization from the polymer to the final material is done.
The final material is dried in air at room temperature.
Upon delivery of the final material.
The final material shall be used at room temperature or below.
The geometric patterns of the final material are therefore lines.
The final material design.
Completion confirmation confirming that the final material is complete.
Final material products or.
Physical or mechanical properties of the final material are not affected.
The final material is sterile filtered and filled in plastic bottles.
See also
This substrate may be sacrificial or become a part of the final material.
The final material may include such an intergranular glassy phase.
A fast rate of drying can produce cracks in the final material.
The final material creates a construct with a core of different porosity.
And this equipment also can adjust the size of final material.
The final material was carefully removed from the funnel and weighed.
The distribution of carbon is important for the properties of the final material.
The final material was selectively active in the catalytic oxidation of methylphenylsulfide into sulfoxide.
The concentration of the dried solution determines the thickness of the final material.
The final material should not contain any high molecular weight proteins.
Partial densification by partial sintering is intended to generate pores within the final material.
The final material is then milled to produce opal powder ;.
Drying temperature and time can also affect the final material characteristics.
The final material was a glass-like material with a light yellow coloration.
The fibre dimension is an indication of the rigidity and strength of the final material.
Which is packing, therefore the final material will be ready to.
Thus precautions need to be taken for polishing surfaces and conversion of the final material.
Preferably, the structuration of the final material is hexagonal, preferably hexagonal in two dimensions.
The initial porosity and degree of graphitization influence the properties of the final material.
Therefore, the modification and adjustment of the final material properties is very limited.
Larger water quantities can rapidly depress the mechanical characteristics of the final material.
The final material integrates a slower crystallization ratio, which leads to more effective adhesions.
Greater water amounts may quickly depress the mechanical characteristics of the final material.
Most preferably, the final material is substantially free of the short chain alkyl polyglucoside.
The apparent bulk density and surface área of the final material was then determined.
The final material is an iridescent green with a light blue-green off-specular colour.
The sintering conditions determine the microstructure and thus also the properties of the final material.
The physical characteristics of the final material are shown in Table 3.
Incremental Technological Innovation Further improvements in controlling moisture content of final material.
The volume content of silicon in the final material is, EPMATHMARKEREP.
Furthermore, according to the method, the powder may be sintered to a dense final material.
The final material was diluted to 10 mL with water.
Lanes 6 represents a sample of reduced final material.
It has been observed that the final material can have a residual porosity of up to 10 %.
Table 2 details the characteristics of the final material.
You'll also be interested in:
Examples of using Material
Show more
Dried material can be removed with acetone
Abstracts must present material in a clear manner
The material scope of immunity ratione personae
Examples of using Final
Show more
Circulate final report to stakeholders in all modes
You are not skiing in the final competition
Recommend final acceptance to the project manager
