Examples of 'final thickness' in a sentence
Meaning of "final thickness"
Final thickness: Refers to the ultimate measurement or dimension of an object or material, indicating the conclusion of a process of determining its width or depth
How to use "final thickness" in a sentence
Basic
Advanced
final thickness
Final thickness of the coating layer.
Determine required depth of cut and final thickness.
The final thickness is determined by the balance of the two.
Shims can be used to control the final thickness.
The critical value of the final thickness is therefore easily attained.
The penultimate size strip is further cold rolled to final thickness.
Rolling out to final thickness could also be properly carried out.
Typically steel is rolled between sets of rollers to produce the final thickness.
The lens was removed and final thickness measured.
Final thickness mm.
The strip is cold rolled to the final thickness of the manufactured sheet.
The final thickness of the disk is determined by the thickness of the sheet.
The structural weight is driven by the final thickness of its structural elements.
Final thickness was controlled together with deposition rate monitoring vÃa a quartz crystal.
The movement of the press toward final thickness can not be affected by this equipment.
See also
The final thickness of the multilayer material is a function of the number of layers.
The cover therefore has to have a larger thickness than the final thickness required.
This final thickness is used to modulate one or more parameters of the surgical procedure.
The thickness must be slightly greater than the required final thickness of the sublayer.
The final thickness will be a matter of choice dependent upon the intended use.
The metering nip reduces the thickness of the sheet to the approximate final thickness.
The final thickness depends upon the different types of weapon that must resist to it.
The cold rolling process may be performed one time to obtain the final thickness.
This final thickness can be obtained by directly depositing the appropriate amount of organosilane compound.
The oxidation temperature and duration parameters should be adapted to obtain the desired final thickness.
Final Thickness mm mm mm mm.
The thickness may vary depending upon the desired final thickness of the graft material.
The final thickness of the microporous film is 2 mm.
Thus, there was almost no limit to the final thickness.
The final thickness of the gasket is 2 mm.
The electrode 1 was then compressed to its final thickness.
The final thickness of the coating is approximately 1 mil.
In trial 2 no defined reduction and final thickness was obtained.
T, final thickness of tape after stretching.
Here, you see a piece coming to final thickness.
The recommended final thickness of the steel strip is at least 4 mm.
Optionally, the sheet so obtained is calendered to a uniform desired final thickness.
Final thickness means, no further compaction of the preform is needed prior to infusion.
Another disadvantage is, that only the final thickness can be controlled.
The final thickness of the film 6 is modified by thinning, for example by sacrificial oxidation.
Spacing strips, as mentioned, can be used only for controlling the final thickness.
The final thickness of the wound thread did not exceed a radial height of 2 cm.
The resultant hot-rolled sheet is then cold-rolled so as to have a final thickness.
Thick . refers to the final thickness of the films actually measured during testing.
Therefore, these two properties must be balanced against each other to arrive at a final thickness.
The final thickness of the film is adapted, for example using a thinning heat treatment.
The sheet may be descaled, cold reduced to a final thickness and then recrystallization annealed.
The final thickness of PZT is obtained by adjusting the number of depositions by spin-coating.
The lens was abraded, then removed, and the final thickness of the lens was measured.
The final thickness is then recorded as X1.
You'll also be interested in:
Examples of using Final
Show more
Circulate final report to stakeholders in all modes
You are not skiing in the final competition
Recommend final acceptance to the project manager
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
